1993 Acura Integra LS
Owner: Carlos Rivera (SpoonFedTEG)
Date Added: 12/15/2004
Date Updated: 09/06/2006
Ride Specs



Spoon Shift Knob


7000K Bulbs 2500k Fog Bulbs






Pioneer Head Unit, Pioneer 4-way's in the Rear, Stock in the Front, 3 12"s 2 Pioneer Subs and 1 Visonik Sub and a 2,000 Watt DLS A5 THE BIG 3 Amp

Future Mods


Posted By: GuessAgainTeg
Date: 11/03/2006
Your DA has potential, keep it clean, lower the ***** out of it and go with smaller wheels. I am looking to buy a DA myself. They are so gangster when done right. Keep it JDM! Check out my ride when you get a chance. It is for sale BTW.....

Posted By: hondaex
Date: 05/16/2006
it looks great keep up the good work

Posted By: ej1_girl
Date: 10/24/2005
nice delsol...good luck with your plans, can't wait to see it.

Posted By: Andrew 11111111
Date: 09/29/2005
where did you get your lip for your sol?

Posted By: rocket_o_rice
Date: 09/06/2005
you sid the blue one has the mini me swap. hows it workin out for it? im about to do the swap myself just wanted to know the gains and how its workin after install. what head did he use and did he have to use the timeing belt from the stock dx or did he need the one from the new head? any way lookin good bro keep it up holla back at me later peace

Posted By: phixion
Date: 08/18/2005
Looks good, it'll handle much nicer once you get the Teins. I got new rear LCAs and a Cusco rear lower tie-bar (been 2 years since I had a tie-bar on). Just got some new tires, Hankook R-S2 Z212's that I'm getting installed today, can't wait to try them out. I'd be scared to scrape the roof trying to see it it'll fit under a semi, but Del Sols are small cars height wise anyways.

Posted By: phixion
Date: 07/27/2005
Don't worry about strut bars, they won't benifit you as much in auto-X as a GOOD set of swaybars will since strut bars DO NOT decrease bodyroll or yaw any. Look like you have either an Si or S model Sol, so I'd highly suggest getting the VTEC model 15mm rear swaybar. I have that same bar on my Civic coupe right now, and it's great! The X-brace and other benen stuff should be fine, they make some real good quality stuff, so excellent choice there. But you'll only need their upper front strut bar, and rear lower tie bar in terms of strut/tie bars. Good luck and thanks for the comments!!

Posted By: Chrismay
Date: 07/14/2005
hi mate do you know if a D15B7 engine is a vtec engine ? Thanks

Posted By: horrse
Date: 07/10/2005
looks nice so far.. I love the intake yous one funny kid.. but I would had kept the coupe, but thats just me, not too big of a fan with del sols.. but keep up good work and good luck with future plans

Posted By: Chrismay
Date: 07/03/2005
what do mean about a vtec switch ? i like the idea of keeping the sohc engine i just want it to be a bit quicker form lower rev's

Posted By: Chrismay
Date: 06/27/2005
hi does the 1600 vtec sohc heads fit on the 1500 engine ?

Posted By: Chrismay
Date: 06/23/2005
thanks for your comment what engine do you have in the civic both cars look really clean keep it up

Posted By: Vteckidd
Date: 06/07/2005
well i got hookups cause i sell bodykits n stuff for a guy that has a wholesale license but i got all my stuff for $200 front/sides/flares and the flares r universal

Posted By: Vteckidd
Date: 06/04/2005
naw dog im killa kali

Posted By: Vteckidd
Date: 06/01/2005
Damn i didnt even see the bike hella sick dog a hit me up if u find any good prices on a ZX6R (Kawasaki) hit me up

Posted By: Vteckidd
Date: 06/01/2005
A thanks dog im lovin da rims on da ej is that del sol an SIR or jus a sohc

Posted By: solady_808
Date: 05/19/2005
aloha...thanks for the comment...yeah, thats what impressed people...that its a chicks ride...I like your ride...pretty sweet...are you going to do more?? I still have more to do...thanks again....

Date: 05/19/2005

Posted By: woyteckkpl
Date: 05/16/2005
nice collection you got there :)

Posted By: 4dr
Date: 05/16/2005
umm try reading my comment again on his page...

Posted By: TypeRFamilycar On: May 11, 2005 08:12am


why do you have an EG6 plate when yours isn't even an EG6?

Posted By: 1.5EG95
Date: 05/14/2005
yo dude , thanks for the comments first of all . i like the car , really clean . thats all i look for , neatness . take care yo , and stay up . late

Posted By: 4dr
Date: 05/13/2005
I never said the 92-95 hb weren't eg's... but his wasn't an EG6... Just so you know, an EG6 is the japanese civic SiR which is right hand drive with the JDM B16A, hence why I said that his car isn't an EG6 because its not the JDM SiR.

Posted By: DelSolSiR
Date: 05/11/2005
Awesome Sol, I've always liked them in red! Can't wait to see those future mods!

Posted By: civicfam
Date: 05/04/2005
Yea you could fit under a semi as well. Nice ride man but add some red to your interior. OneFam

Posted By: TeamRPMaccord
Date: 04/12/2005
nice rims on your ride.

Date: 04/01/2005
hola carlos muy bueno tu carro

Posted By: d-block
Date: 03/16/2005
nice ride, but i think ill take you and the bike ;) lol keep up the good work and cheack out my ride if you get a chance

Posted By: SpoonFedTEG
Date: 03/13/2005
Project_D the blue hatch is my boi's car and i got the del sol like a week ago but thanks

Posted By: Project_D
Date: 03/11/2005
love the blue eg and del sol keep up the good work!!peace

Posted By: egb16acivic
Date: 02/27/2005
Nice Bike

Posted By: SpoonFedTEG
Date: 02/27/2005
well IronMan thanks for the comments but i jus hate it when ppl tell me that i am doing something wrong when its my style u know but thanks for the comments and for the spoon parts there in the head the valve springs and that stuff but holla

Posted By: AutoEuphoria
Date: 02/25/2005
Nice bike :)

Posted By: IronMaN
Date: 02/20/2005
i don't see why so many people (such as yourself) feel that it's bad to leave disaraging comments. everyone keeps complaining, "don't hate". it's a comments section, so why can't people tell you what they don't like? it's called constructive criticism; haven't you people been paying attention in school? if the comments weren't appropriate, the administrators wouldn't post it
now, as for your car--> i think your swap is kind of cool, really dislike your taillights, like how you know it's JDM corner lights and not JDM OEMs, nice lowering, but could use a simple body kit to compliment it

and if it's spoon-fed, where are the spoon sports parts? =/

Posted By: rce^rkt
Date: 02/16/2005
how u noticed a good gain off the engine swap?

Posted By: TeamNextGen
Date: 02/12/2005
nice car!very unique swap.what's the setup with it as far as ECU,wiring,mounts,etc.....

Posted By: j
Date: 02/02/2005
hahaha, nice john woo stunt on the bike.
that blue hatch is tight, just needs rims

Posted By: CivicD.
Date: 01/26/2005
Love the wheels mate. Like the color as well. Now get that engine sorted !!!...LOL
Nice car Bud, Keep it up. Regards Chris.

Posted By: Devil ride
Date: 01/19/2005
spoon devolded so the redline starts at 11,000rpm

Posted By: 4dr
Date: 01/18/2005
how we blew the motor? it was a melted piston

Posted By: Devil ride
Date: 01/15/2005
hey dude..thanks for the comment. i liek chromes and black chromes 2... but chromes is my fav...so yea.. lol...who knows if one day my alloys need replacing i would get black cromes.....
dude about your motor how many horses do they give out?
btw i do wana lower it but if u read my statement b4 u would understand thailand....road conditions and stuff arnt made for reali low carz...unless i have dayum great suspensions... which i dont lol...so yea.. otherwise i would love 2 lower it lol

Posted By: Kazuki
Date: 01/08/2005
hey could u tell me.. do u liv in colorado, i couldve sworn I saw your exact civic, the green one..it looked identical, the green 92-95 design, lowered with rims that looked like yours..

Posted By: veilsid3
Date: 01/07/2005
hey yeh the guy at the fibreshop had to cut everything smaller to fit my car. It took bout 2 weeks just for the front to be modified

Posted By: Yooooo
Date: 01/06/2005
Na bro I don't got Disk Brakes in the rear...I wish but not yet....I live in El Paso tx bro how about you? Halla back on my page Bro..Keep up the good work....SOHC VTEC'S RULE ALL!

Posted By: TETVTEC
Date: 01/05/2005
Hey Bro.. Thanx for the Comment... Sweet ride man.. But you should have bought a B-serie engine...then your car would have been a nice sleeper...! See ya..

Posted By: Yooooo
Date: 01/04/2005
Na bro my green was a little darker I have some old pics on my car domian page if you what to see the green http://members.cardomain.com/starkidscivic Keep up the good work bro & remeber SOHC VTEC RULES!!

Posted By: kenkoy
Date: 01/04/2005
wut do you mean give it up?.....anyway thanks for the comment....am kinda looking in something else to work w/ right now......something a little odd to look at(old school cars/import cars)...anyway nice ride still

Posted By: Yooooo
Date: 01/02/2005
look ok but if you don't mind me asking what happened to the original motor it has a better red line..But nice ride

Posted By: kenkoy
Date: 01/02/2005
you could go for a 7th gen civic intake...should fit....you best bet will be an AEM V2 or a short ram intake....but that motor you have is not too good w/ bolt ons....but props to you though....love your swap and if you got time check mine out.....later....

Posted By: 4dr
Date: 12/31/2004
They still arent the TE-37 Gravels because they still woudln't have the extra lug nut holes, overral I don't think Rota makes 17" rota grids and now I'm 98% sure theyre Konig Rated-R

Posted By: Kazuki
Date: 12/31/2004
back when i was looking for an intake i was concerned about the same thing, wondering if the intake would hit the hood since we got the design where the throttle body isnt sideways, but no worries, fits fine, and doesnt even hit the hood..just make sure you buy an intake with the more curved design

Posted By: Kazuki
Date: 12/31/2004
i havent had any problems with the intake hitting the hood, the intake i have was made for the d16y7...by the way, nice rims on that green civic, and thats really impressive u got a 2002 civic engine in your car..and how did you have that swapped? did you do that, or professional..and how much if professional installed?? becuz after i get my bodykit painted and installed, i really want to consider a swap, and im wondering what kinda money i would be looking at for that kind of a task... thx for chekin out my car(i need to update some pics, becuz i just got 4 new things)

Posted By: phixion
Date: 12/31/2004
All TE-37's say Volk on them, and also if you look on Volk's website, the TE-37's are like my Rotas where they have the exact number of holes for the wheel studs. Also another big test is, if the wheel is smooth on the back side, like as smooth as the front side, then they are probably authentic. Also of note, the original TE-37's from way back were 5 spoke instead of 6 spoke like they are now.

Anywho, I was refering to Orange County CA.

Posted By: phixion
Date: 12/28/2004
Chances are they are 5Zigens then, though many companies, even Arospeed made TE-37 knocks. You won't find them because I think they have been discontinued for a few years now, I gotta ask my friend what model they were called, he thought Fireball, butthat wouldn't be right LOL! Anyways I got my rims just as you see them, black with polished lip from Rota. Got them for a local shop here in Orange County called Island Motorsports. $450 + tax for the set of 4!!! And Rota is good quality, I know of some Japanese show stock class racers that use them on their cars at the track, no problems. Anyways, as for my lug holes on them, mine has just the 4 needed for my bolt pattern, none extra. The Rota Circuit 8's (silver) you see in a few of my pics have 8 holes however, those are knocks of Mugen MF-8 wheels.

Posted By: watson
Date: 12/27/2004
I love the coupes! I bought the four door because it will fit my friends more comfortly, and they are the same weight as the coupes from that generation.

Posted By: phixion
Date: 12/27/2004
I'm giving a better look now, I'm skeptical about your wheels. For one, TE-37's have Volk and "TE-37" written on the spokes. They also have signature centercaps, and lastly they AREN'T multi holed as yours are for the lug pattern, real TE-37s have the exact number of holes as lug bolts, and none extra. I have a friend with authentic TE-37's and his definitely aren't like that. Your's remind me of his old 5Zigen TE-37 knocks that he used to have before the Volks. Just an observation, not knocking. ;)

Posted By: phixion
Date: 12/27/2004
I have the Rota version "Grids" unfortunately, I couldn't afford the Volks, but I like the ones I have, no complaints here. :)

Posted By: evelina
Date: 12/27/2004
it's nice!

Posted By: Xtina
Date: 12/23/2004
Thanks for the comments man, yah I think that kid likes to talk some pretty tall smack to a lot of people. Anyhow car looking good, can't wait to see the new paint.

Posted By: HondacivicexBoy
Date: 12/22/2004
hey man. sorry i'm pretty sure youve got some copy cat volks.heres some real ones http://www.hondashowoff.com/profile.php?id=3027

unless ofcourse someone got those power coated or painted? in which case the stickers would of been removed

i like seeing the new D series in there. too bad those things arent much faster than the 1.6 ltr. vtec

D17A2 127 hp @ 6300

114lb-FT @ 4800

D16Y8 127 @ 6600 rpm

107 lb/ft @ 5500 rpm

nice choice on the swap tho!

Posted By: Soundfx
Date: 12/22/2004
Tanks :).nice coupe.its going to look really nice when you get all of the future mods done :)keep me posted with new updates.no im not from germany :)

Posted By: PaRM
Date: 12/22/2004
all i got to say is just becaue an engine is a b16 or b18 doesnt meen its fast.. i got more power off the line than any civic i have come across.. i meen hatchbacks are the only thing that hang with me. i meen i have raced a 540i bmw and lost.. but i meen thats a *****in bmwer.. i really think it depends on the driver and than a lil on the engine.. if you swap one SOHC for another you might be able to get a faster rotation thus giving you more power.. so really it does serve a purpose just to let you know..

yah i really like the sohc though man..i love my car theres nothign really more to say.. shes got enough power for me now and when i turbo her later she'll fly..

Posted By: 4dr
Date: 12/21/2004
Im 15 and you think I don't know what I'm talking about? whatever dude I know those arent volks so dont go around trying to say you got 1,400 rims, and by the way, what was the point of swapping a sohc for another sohc? thats like swapping a b16a2 for a b18b, serves really no purpose

Posted By: 4dr
Date: 12/20/2004
you got yourself a set of rota grids, get it straight, the spokes are too thick and go way to far to the lip, i hate people that try to say that they have something that they really dont

Posted By: Accordian52
Date: 12/20/2004
thanks for the comments! unfortunately, my car was stolen, and never recovered..
your car looks great though! crazy engine choice!

Posted By: PaRM
Date: 12/20/2004
thanks man..i like you civ..is it an ex or what..? but yah my brother did everything to my car i just bought it from him..but he said that he changed the bulb to a lower watt and it puts a dimmer light out..i like it cause its harder for one to see you..so no popo sees me mashing around..
you have sohc? if so thats what i got..but i dont see why people say b16 is better..i have hella beat my friends who have swapped that into there car.. i am pullin 130 hp with my engine stock and loving it..i race everyone..i have beat si's and im stock and there dohc vtec but i still win.. single is better..LOL ..but hit me up bro.. late

Posted By: Justin
Date: 12/19/2004
pretty cool swap... i like it!

Posted By: [FIN]smo
Date: 12/18/2004
allways loved a civic coupe, allways will. :)

Posted By: 1sickcivic
Date: 12/18/2004
thats different all right, well done.

Posted By: AllShowNoGo :o)
Date: 12/17/2004
The trunk came fron fiberimages for $600 with shipping .Here is his email fiberimages@earthlink.net .Nice start by the way.

Posted By: SpoonFedTEG
Date: 12/16/2004
I jus wanted to try sumthin different then the k-series swap sumthin nobodys done yet but it has been lowered 3.5 inches and i love sohc smaller motor faster rotations and thanks Jezekracing for lettin me know cause i got them for my stock steelies but thanks guys and keep them comming i want to know what ppl think of my ej1

Posted By: JDMeK9
Date: 12/16/2004
car pretty clean just get the stock rear lightz or JDM rear lightz then it be clean and WHOA never seen anyone put a d17 in it yeT lol impress but yeaH keep it clean not so BEANER ride well clean ride

Posted By: danielbendorf
Date: 12/16/2004
Good work on the engine swap and keeping it looking like a regular car. :-D

Posted By: GeTinLine
Date: 12/16/2004
Awesome civic! i like the rims and the amber corners. and i've never seen the D17's in this Gen civic.. thats crazy.anyways nice ride.

Posted By: jezekracing
Date: 12/15/2004
I like the Rota Grid wheels you got on. Looks good. Too bad they weren't real Volks :/ Pretty clean so far. I'd suggest gettin all red or red/clear tails to make it look cleaner. Late.

Posted By: Type.R.Brains
Date: 12/15/2004
Yo man what up with the si? and why would you swap for a 2002 ex motor? unless your going to run fully built turbo and engine managment system, single cam is useless. you have the right idea of keeping it clean. Rip off those taillights, drop it a few inches, and put a lip kit on it. hit me back

Posted By: B.
Date: 12/15/2004
nice one! your engine is 17 horses????? how many horsepower from there? please answer in my site ,thanks,