1996 Honda Accord Turbo
Owner: Ian Palo (Ian77)
Date Added: 01/08/2005
Date Updated: 04/02/2008
Ride Specs
Engine

F22B2 5 speed SOHC non-VTEC
Turbonetics t3/t04 Turbo
Turbonetics Cast Iron Manifold
Spearco Front Mount Intercooler
Evolution 35mm Wastegate
Raptor Blow Off Valve
K&N Air Filter
AEM cam gear
Nology Hotwires (silver)
Denso Iridium spark plugs
Injen oil cap
Tanabe Hyper Spec exhaust (no cat)
Exedy stage one clutch
Fidanza light weight flywheel
Unorthodox pulleys
DC Sports short throw adapter
B&M fuel pressure gauge
MSD boost timing manager
Apexi Super AFC
Apexi turbo timer

~ 186 WHP 190lb/Tq ~

Interior

-MOMO steering wheel
-Mugen shift boot
-JDM Type R shift knob
-X-racing E-brake
-Sparco carbon fiber pedals
-Ractive white face gauges

Exterior

-DEPO JDM two-piece Headlights
-PIAA bulbs (low and high beam)
-clear bumper lenses
-amber turn signals taken out of taillights
-Type R front grill (painted black)
-removed mud guards
-Seibon OEM carbon fiber hood
-35% window tint
-Clarion UNGO Pro security system

Wheels/Tires

-16" Glossy Black Motegi FF7 rims w/ polished lip
-TOYO Proxes T1-R 225/45/16 Tires
-TOYO Proxes 4 225/50/16 Tires (winter)

Supension/Braking

= Corners =
-TEIN Basic Dampers
-Tanabe Sustec Stabilizer (sway bar) lower front
-DC Sports front upper strut bar
-DC Sports rear upper strut bar
-DC Sports rear lower tie bar
-Camber kit
= Brakes =
-Powerslot slotted rotors (front)
-Endless Vita Nuova performance brake pads (front)
-Stock rear brakes (drums)
-Earls Stainless Steel brake Lines
-Redline DOT 4 brake fluid

Audio/Electronics

-Pioneer Premier DEH-P660 CD receiver
-XM Satellite Radio
-Pioneer 6 disk-CD changer
-6 1/2 Polk Audio/MOMO Component speakers- front
-6x9 inch Infinity Reference speakers - rear deck
-1 inch Polk Audio/MOMO tweeters - front doors
-Alpine Amp MRP-F240 - under driver seat
-10 inch Polk MOMO subwoofer in custom enclosure
-Alpine Amp MRD-M300 in custom enclosure

Future Mods

Sold

My new car is a 2002 Subaru WRX.
www.myspace.com/staytuned_77

Comments
Posted By: cd6accrd
Date: 09/12/2008
wat up man, hows the WRX comin along? i just put up some new pics with the cf hood and new wheels. i also just got a cf gas door but it is not pictured. come check it it out and tell me what u think.

peace

Posted By: cd6accrd
Date: 07/07/2008
wat up man, i got a new paint job, check it out!

Posted By: speedy31
Date: 05/28/2008
WERE DID U GET THE TURBO FOR THAT AND HOW MUCH. HOW MUCH BOOST WERE U RUNING

Posted By: nspec
Date: 03/23/2008
so what r u getting next?



were u pushing that much whp w/ a stock motor?

do u know how much can the stock motor hold w/ a turbo kit?

Posted By: 34343
Date: 03/14/2008
where did you get your turbo kit?



email me were you got it.



firefoxxx@insightbb.com



thanks man, nice accord btw.

Posted By: cd6accrd
Date: 03/14/2008
very nice accord you had, too bad u sold it tho, what u gettin next? did those tein basics have good ride quality on bumpy roads?

Posted By: Del!
Date: 02/25/2008
hell yeah man! it may not be a h22, but dang i bet this car can pull!!!



real sick accord!

Posted By: westcb11
Date: 12/24/2007
D@mn man nice and clean

Posted By: 96_accord
Date: 05/22/2007
im wanting to do turbo my f22b2, how much psi do you have on stock motor?

Posted By: Ahh Cord
Date: 04/27/2007
Hey man hows it going could you like do me a favor I dunno if you actually can but to take a clear day ligh tpix of your wheels up lose but get the over all wheel s though and just different angles or soemthing so that I can see hwo the tire walls pop outof the rims or etc beause 225 ? wow kinda wider tires than a 215 which is how far id go with the 17s but 225 on a 16 WHOOOO so i wanna see what it loosk liek you know ? well if you can do that for me that will help alot I want to get the rota slips really bad! jsut dunno the tires size Id want to get I dont wanan go less or more than my stock Diameter size but if it goes a tiny bit bigger its fine but mainly want to keepit the same size as my stock diameter size. heres my email so you can send th epix to me when you can



Techman4ever@hotmail.com





Thanks!



btw Im currently swapping my interior color form baige (TYPE-F) to a grey (TYPE-B) color codes to bad its not a TYPE-R lol maybe its th eblack leather ? only in Japan ? lol I dunno

Posted By: nspec
Date: 04/23/2007
hey man. y dont u throw an h23 head on there? it'll i bolt right on. i'm looking around for h22 head at local junk yards and i'll just add the h22 computer w/ that.

Posted By: Ahh Cord
Date: 04/15/2007
WOW love what you did to your Accord keep it up! Your tire are prety wide whats the width sizeof your rims? since their size 16" I want to get the Rota Slips bt unsure if I should get them in 16" or 17" but im thinking 16" but then the tires id like to get for them are like 215 - 50/55 - 16 but I just want tomake sure what it will look like first. How was the added turbo work for you , did it add a lot of boost or just some what much better or? Im wanting to get my motor Swapped with a H22 and then add a turbo if I can if not I'm fine with the H22 alone. Well let me know about the wheels.

Posted By: Chris Styles
Date: 03/21/2007
nice accord man.. you should get a better front lip then the stock one... and hows the turbo on the SOHC Non-V?

Posted By: speedy31
Date: 03/21/2007
Thatz a bad car man, i like what u have done with it

Posted By: ImFresh
Date: 03/18/2007
Alot of engine mods I see .... Nice!! I'm diggin the original look too .... tired of seeing accords looking the same .... good job

Posted By: liebre_26
Date: 02/26/2007
nice accord man, i like the turbo intec.

come to see my ride!!

Posted By: jav94
Date: 02/10/2007
how much was your hood

Posted By: jav94
Date: 02/07/2007
wow nice set up i was planing on doing mines but around my way theres alot of stealing going had an integra all done up pushing 285 to the wheel so lost hope////

Posted By: bkayfes
Date: 01/26/2007
the beaverton/portland area. how do ppl like ur car in that area? i thought they were more into lifted trucks and *****T lol.

Posted By: s2kguy07
Date: 01/19/2007
yeh im gona peice my own together, gota order the crower camshafts first then ill save for turbo

Posted By: bkayfes
Date: 01/19/2007
love the ride man. im from oregon too...where you located?

Posted By: s2kguy07
Date: 01/17/2007
how much u get the kit for?

Posted By: s2kguy07
Date: 01/16/2007
NICE MAN UR BOOSTED NOW! how much boost are u pushin since ur on stock internals? how fast is it now??

Posted By: nspec
Date: 01/16/2007
sweet man. when did u get the turbo kit. i dont remember u having one. and how much did it cost u in total? and the headlights look great too.

Posted By: JDM PANDA
Date: 12/12/2006
hey dude i see you have tein basic dampers. pretty sweet! have you tried goin lower?

Posted By: juanpiringo
Date: 12/05/2006
nice ride.check out mine


Posted By: nspec
Date: 11/28/2006
hey man. i'm gonna be selling my headlights pretty soon, (as soon as I get me custom ones ready) plus i'll throw in the clear side markers and the clear front bumper. let me know if u are interested. i wanted to let u guys know before i put'em up on ebay for sale.

the only thing u might not like will the corner the passenger side corner light, that was repaired.



so here is what will be included:

- black housing headlights w/ corner lights. w/ Sylvania Bright White light bulbs included ( just those alone were like 40 bucks and both are new.

- clear front bumper lights w/ some nice blue bulbs

- clear jdm type fender lights.



look at my pictures to see whats included.



i'll email u more if u need em.




Posted By: elchichix
Date: 10/11/2006
Thats a nice accord right there... thank you for your comments... I was thinking about getting those headlights... They look tight!

Posted By: nspec
Date: 08/10/2006
hey ian. i've been looking around to find information on a 5 lug conversion. do u have any ideas or info on that. please let me know. thanks.

Posted By: AmbulanceMonkee
Date: 08/04/2006
Clean, and very cool. Nice car.

Posted By: CD5acrd
Date: 07/24/2006
Thanx for the comment. I can understand that you are ready to move on to another ride. RSX is cool car. You might want to consider an H22 swap I got a chance to ride in Accord with one and it turns the car into a whole nother animal. I was saving to do the swap my car was stolen. Good luck on what ever you decide.

Posted By: stratijikal
Date: 07/15/2006
I have a 1997 accord lx with a 3 bolt header down pipe flange. I bought those same headers and they wouldnt fit on my car. how did you get them on yours? ive been trying to find some headers that fit my car and cant find any.

Posted By: hahaha
Date: 06/23/2006
mmmmm looks ok but too slow for me

Posted By: hondagirl
Date: 06/19/2006
Kool car I love that carbon fiber hood.

Posted By: nspec
Date: 06/15/2006
the molding i was talking about was the door molding.

Posted By: s2kguy07
Date: 06/02/2006
haha its all good man

Posted By: 19 5th gen 96
Date: 06/01/2006
thanx man....your car came along good too i see!!

Posted By: nspec
Date: 05/31/2006
thanks man. ur car looks better. i got a suggestion for you. u should go to a local pick-a-part and see if the have an accord ex same color as yours and you can get the molding off. and you should put the original rear bumper lights back on. these look good but only when you have altezza taillights.

i also slike ur steering wheel, i'm gonna wait till i save enough for a jdm civic steering wheel, that will come with an airbag too. but any ways, keep up the work and updates.

Posted By: phixion
Date: 05/08/2006
if you're on stock, I wouldn't go much bigger than 2-3mm more than what the stock size is to be honest. Stock Civic size is like 58mm and I never see guys putting on more than 62mm, even WITH the fuel system and intake mani upgraded. So 66mm would be more than plenty for yours.

Posted By: phixion
Date: 05/04/2006
Generally bigger is better, but it's only as good as the intake manifold you're using. if you upgrade the T/B it's best to upgrade the intake mani for a higher flow one as well. Then you'll want to consider a fuel system upgrade from there, pump and injectors... Endless cycle really. ;) But yeah. Good luck!

Posted By: s2kguy07
Date: 04/25/2006
hey man if ur lookin for another f22 ill sell u mine for 300 bucks

Posted By: nspec
Date: 04/20/2006
hey man. I had one question for ya. do u feel big differnece in driving w/ those tiens? I'm changing my plans again. I'll keep the car. I'm getting 18s in a few weeks and will need to lower it too.

Posted By: s2kguy07
Date: 04/14/2006
thanks man, should have it running tonight :)!!

Posted By: nspec
Date: 04/14/2006
nice accord man. i've gotta similar one. ur car looks awesome dropped. check out mine too.

Posted By: kevoweb
Date: 04/08/2006
sharp accord. a front lip would be awesome to improve the look. keep up the good work man.

Posted By: pata 078
Date: 04/06/2006
I thought LX Civics were the only cars hard to find Exhaust, Headers and stuff. I guess for the entire LX family it's kind of difficult huh?, it happens to me a lot when I go to a aftermarket spot. Anyway, the tail lights without that little amber thing inside makes a nicer look. Love the steering wheel too. keep it clean Dawg >>>Later<<<

Posted By: mrjoker1us2
Date: 04/06/2006
i might be out that way some time my friend stays in Salem

Posted By: mrjoker1us2
Date: 03/27/2006
was crackin any new things on your ride? you got to come see my Accord i painted it pics are updated

Posted By: PolishmyAccord
Date: 01/31/2006
Yo...you have a sexy dash...how did you get the white backround with the numbers...did you have to replace the whole dash assembly or just the backplates, im not even sure how to do it...all i know is i want something like that in my accord...get back to me man, id really like appreciate it

Posted By: Chris Styles
Date: 12/23/2005
real dope accord... really feelin ur style... much props...

Posted By: 19 5th gen 96
Date: 10/28/2005
got a whole new car prety much...the pics on here are the ones i took when i got it back....painted stock lips bottom inner front bumper, new dash, everything turned out awsome.....kinda glad i hit that guy!

Posted By: CD5acrd
Date: 10/24/2005
Thanx man...I like your CD5 it's very tastefully done. I like cars that are functional like yours. Trix are for kids. I don't plan to get another Accord it just won't be the same. Also I don't wanna start over with a bone stock Accord again after driving a modified Accord for so long. Right now I'm looking at getting an DB8 Acura Intergra GS-R 4door, P-11 Infiniti G20t, S-14 Nissan 240SX SE, GC8 Subaru Impreza 2.5RS. or UA2 Acura 2.5TL. I'm gonna keep my CD5 Accord page up on the site cause it was a good car.

Posted By: s2kguy07
Date: 10/18/2005
hey whats up..yea i love the apexi ws exhaust..at first it was really quiet and now after i broke it in it sounds great..sounds really good when u get on it and also at low rpm's when ur boggin it...i def recommend taht or the Greddy EVO catback

Posted By: s2kguy07
Date: 10/18/2005
i love ur sub set up...now u have trunk space..good job

Posted By: mixalis
Date: 10/17/2005
i haven't drive any of sohc 22l engine,how many horse power?what cars can you beat?i mean honda car and what engine...keep up the good work,pls answer in my site

Posted By: 19 5th gen 96
Date: 10/12/2005
i just was in the forum askng about false floor enclosure and you have it!! does it make a big difference? how does it sound.....and how did they do it? thanx for including me in your comments about the tail lights! thats awsome! get back at me...thanx!

Posted By: Ahh Cord
Date: 10/12/2005
Hey Ian, No i didnt paint my moldings since its an EX trim



DX = black side moldings and mirrors

LX = Black side moldings and body colored mirrors (pw n pwr dr)(which is what u have, let me guess u dont have a moon roof correct?)

EX/SE = body colored moldings and mirrors (pw, pwr dr, n moodroof)



this is what its trim levels should be like if u see any odd matching then it may have been in a wreck and was repainted over or switched and the side moldins on mine im planing on shavin them so i dunno if u still wanna paint em to match ur car or hmm shave them and then paint em i like them off tho if u check Vanessas car out she has her shaved off thats what i like her page is http://www.hondashowoff.com/profile.php?id=5669 so checkhers out. and thanks for letting me know what the rear strunt bar is actually called heh well hope i answered ya question n keep me up dated onur ride aight peace bro.

Posted By: BlueBeast
Date: 09/29/2005
wats up like the ride see u got proxes 4 on it

Posted By: Ahh Cord
Date: 09/28/2005
oh hey ha ha sorry it was Leos car i felt sorry for ha ah not urs ahhhhhhhh! so many silver accord so confused !

Posted By: Ahh Cord
Date: 09/15/2005
hey Ian what or how did u heat the silicone molds up what did u use and hot hot should it be cuz the whole taillight piece is what plastic ? dont wanna melt that ofc and please dont tell me u used a hair dryer, thats not hot enought ha ha (its what my friend said) so letme know how u actually did it i have a euro tail i tried painting it to make it black housing and i didnt heat it up to well and ended up cracking the tail how ever no one likes the euro lights for some reason so oh well i like my red n clear so well let me know k peace




Posted By: 19 5th gen 96
Date: 09/10/2005
where did you get your front grill from and how much?

Posted By: Ahh Cord
Date: 09/09/2005
Ahh haha whoa looks good man i liek the way u have the taisl all red n clear it looks really good and good job onit too was it hard takin it out or not to bad ?

Posted By: 19 5th gen 96
Date: 09/04/2005
yeah it sux....but its getting fixed and its gonna look better than it did!!!

Posted By: g35ExGt
Date: 08/26/2005
looks sweet, nice upgrades

Posted By: mrjoker1us2
Date: 08/11/2005
nice looking ride i wish mine was 5 speed, i would turbo it best way if you cant get the H22

Posted By: 19 5th gen 96
Date: 08/08/2005
lot of careful cutting and pulling.

Posted By: 19 5th gen 96
Date: 08/08/2005
yeah it was kinda hard...just had to do some careful cutting and pulling..then glue/melt it back together so the light fixture will still be in place

Posted By: phixion
Date: 08/02/2005
Thanks a lot man! I like your wheels, kinda similar to mine, and Toyos are great tires too! Good choice on suspension! Well good lick with your Accord, keep up the good work!!

Posted By: s2kguy07
Date: 05/04/2005
thanks man, ha i still like the white wheels so im prolly gonna throw some cheap tires on them and make them my winter wheels. haa..thanks for the comment latah

Posted By: Ahh Cord
Date: 04/28/2005
Hey Ian hows it going hows the tail lights coming and also ur from oregon humm cool my frind San and Jeffery both are from there and il be vistiting in Oregon this summer with Bethany an dmy boy Long (integra parked in front of my old Maroon Accord) he will be coming too so we will be street racing for the first time i never done it yet heh eekkkk but what area are u from in oregon ? and also does ur car bounce alot when u drive it ? other wise how come u gettign the tein coilovers ur car is already lowered right ? welllet me know whats up k peace

Posted By: s2kguy07
Date: 04/27/2005
aite, i talked to somebody with a obx header and he said it made it sound deeper, but him and i both have bigger pipes runnin back from the cad converter so ill go ahead and get one. i was plannin on orderin one a few weeks ago but i cracked my rim and now im just ordern all new ones so whenever i get the mola ima do it. latah bro

Posted By: s2kguy07
Date: 04/26/2005
hey did ur car sound any different when u put that dc header on it?

Posted By: s2kguy07
Date: 04/26/2005
hey, thanks man. yea im gettin sick of waitin for those damn rims to get here they are like a week late

Posted By: Ahh Cord
Date: 04/25/2005
hey Ian the skunk2 coilovers i have arent isntalled yet is so gay! man ugh still ddint get em instaled but i will but how ever a frienof mine Jeffery he has the skunk2 coils and man ride good not so much bouncin inthe bad free ways so its why i got em but i also got shocks too Tockicos adjustables so that shoul dhelp a lil more so will see how it turns out later when they are in sighi just cant wait but oh well

Posted By: Junior13x23
Date: 04/21/2005
nice car, keep it up

Posted By: TeamRPMaccord
Date: 04/12/2005
nice car...i like your steering wheel :)

Posted By: Ahh Cord
Date: 04/05/2005
hey Ian ahh well for me to be onthe safe side i have red light bulbs but maybe u can have white i dunno but use red tho if u want u can check ur local laws about the lighting in ya area whats alowed or not u know? so yeah but best bet is just to use a red light bulb. i had blue bulbs for the parking light and rear b4 but i idnt wanna take any chances of getting pulled over so i just used the stock colors at least the lens are clear so its alright with me im thinking of doing a custom lighting in it soi ll have a switch to change either blue to amber or red light which i think would be cool

Posted By: Ahh Cord
Date: 03/28/2005
*laughs* ahh hey Ian sorry i got a question u said u needed new spark plug wires what kind do u have righ tnow its red i see in the pic i was just looking at it and is it heavy duty kind or just a stock replacement ? seems its thicker but i dunno pix and cams add lbs and so i dunno lol

Posted By: Ahh Cord
Date: 03/28/2005
OK here i go again, whoo more comments to you. lol i dunno if it will be the forth one in a row but hey its all good, so u caught the rear bumper marker light huh lol well i got that a long time ago way b4 i knew about ebay and i got it at the AutoFreak and costed me a woppin 30 bucks at the time which is alot but go on ebay or check at any import stores where u get performance n car parts im sure they have em. other than that any thing else pls let me know and if u have any interesting tips or infos please share with me as well cuz im new with all this too im just learning on the way as i go. good choice on ya type r grill tho i like it same as mine lol :-p

Posted By: Ahh Cord
Date: 03/27/2005
hey Ian i just got a hold of jeffery and showed him the comment u asked about the spark plug and he said to go with NGK even my best friend with thee Integra says NGK so i have NGK spark plugs and wires and i like it so i geus it be ya best bet on that one but u can also maybe fine a thicker wire NGK at a racing stores maybe ? cuz mine is a stock replacement kind but just better than the OEM i had so go for the NGK or do a lil more research on it i geuss ok ? i hope i did some help peace bro

Posted By: Ahh Cord
Date: 03/27/2005
Oh yeah Ian my friend bethany she got a new spark plug wire which is a thicker wires hmm maybe she may know better than me lol but she prolly got some ideas from my other friend jeffery but he doesnt know his pass word to his profile so askl her about it maybe ?
Bethanys - http://www.hondashowoff.com/profile.php?id=4176

Posted By: Ahh Cord
Date: 03/27/2005
Hey Ian hows it going? well humm about the spark plug wires let me be honest with ya alright as i always am im not so good with sparkplug brands or kind to be honest i dont wanna say and think i know you know what i mean and look stupid so, the one i got isnt a high performancei dont think since its not (Thick) its just a replacement for the stock is what i think but the one i got is NGK and im very happy with that one cuz i know NGK is a good brand so i accepted it heh it was from a friend he tried to put it in his integra but it didnt fit cuz it was for a 98 accord and he just gave it to me since my car wouldnt start due to the bad starter and an old stock 96 sparkplug wire so now its bam starts perfect. and ur taillights i really hope u can get it out easy by drilling the amber lens out and plying it out and let me know how it goe sok i got a new pic of my rear since its a red / clear tail and hows the type r lip did u see it ? well sorry about not being much help o n the spark plug wires altho if u do find out then let me know, cuz im clueless on that but maybe look in magz and see whichone is most advertised ? such as DC Sports Skunk2 AEM those guys are inthe ADs constantly and they are good brands and great performance, but let me know how it goes ok ? peace yo

Posted By: 19 5th gen 96
Date: 03/05/2005
how much of a difference did you notice when you added intake , exaust , and headers?


Posted By: Ahh Cord
Date: 02/10/2005
Ha ha ha ha .. its all good Ian i just wanna make sure it goes smooth ya know cuz the one i had was a spare that i had sorta jacked but not really i got permissioned to take rear bumper and door panels but then i just u know what the heck *takes the tail lighs as well and other parts O:-) * so in case anything goes wrong while breaking the orange lens i have a spare ya know lol so but yeah shhhh dont tell on me ok :-p peace btw the black accord was going to go to the junk yard im just recycling the tail lights:-D

Posted By: Ahh Cord
Date: 02/09/2005
yo Ian did u get the amber lens off yet? hows it coming along? well let me know k? i have the directions on my profile in the new car profile tho (silver accord) so check it out k peace

Posted By: Ahh Cord
Date: 02/05/2005
hey Ian check my profile and on the COMMENTS i wrote down how u can take off that Amber lens inside the tail light k so when u do start on it let me know how it went after ya done ok ? and if u have any questions pls let me know ill get back to u asap ill chaeck my profile for feed backs daily soi can get back at cha alright ttyl man

Posted By: s2kguy07
Date: 02/03/2005
hey man looks good check out mine, latah


Posted By: Ahh Cord
Date: 02/01/2005
hey bud if u have AIM heres my screen name GoofBall7925 so i can tell ya how to take it out and what u need is drill and a long nose plyers so get those items and message me and ill show ya what to do step by step k when ever ur ready

Posted By: Ahh Cord
Date: 01/25/2005
Hey Bro hows it going? yeah i like it alot better with out the amber color lens inside it makes it feel like a Civic Si tail. however to take out can be a b!tch to take out. but i figured an easy way to do it so first try took me 3 hours second try just 30 mins. i will have drirection on how to take them out and also i will draw and have pics to show u how. i dont want ya to mess up cuz i messed up on my euro tail trying to take the whole lens off and make it black housing tail but cracked the lens and its actually lil more work cuz talking the lens out and then reattactin or gluing ahh forget uknow so the stock tail is tons better than any iknow of IF the amber lens is off. and i know u can actually buy red/clear stock lens but im cheap so lol mine works well tho so ill keep u posted and let uknow when it up ok ? illcome back fromwork and workon the pics and direction on how and let ya know and thanks for checking my profile out u got a tight ride tho somuch like mine huh.. ok gotta go peace out and ill get back to you with it k

Posted By: Ian77
Date: 01/22/2005
The back armrest pulls down and opens into the trunk. The amp is mounted on the sub and positioned by the opening in the back seats. I can make changes better this way. Thanks for taking a look!

Posted By: SaraBoo
Date: 01/21/2005
love it... keep it clean hun. ;)

Posted By: Tptpgogogo
Date: 01/21/2005
Is that an amp in the armrest in the backseats?

Posted By: Ian77
Date: 01/13/2005
I don't have a digital camera so I had to scan them first. I had them put on a cd and then I uploaded them to the site. I know they don't look perfect but it was the best I could do. Thanks for looking!

Posted By: Blink182house
Date: 01/10/2005
Looks pretty good man, check out Jason's... it's the same body/color as your's, and his car is just beautiful! http://www.hondashowoff.com/profile.php?id=1776

Posted By: Accord Vti-s
Date: 01/09/2005
dude, Change your tire to low profile. you'll see the differences!ALso remove your mudguard.check mine sometime

Posted By: AllShowNoGo :o)
Date: 01/09/2005
Looks pretty clean

Posted By: 1sickcivic
Date: 01/09/2005
clean ride, im not sure on the black rims.

Posted By: jezekracing
Date: 01/09/2005
Not bad man...I like your steering wheel a lot...very nice. Late.