1996 Honda Accord EX (Whip-02)
Owner: Joe (Ahh Cord)
Date Added: 02/03/2005
Date Updated: 05/17/2010
Ride Specs
Engine

-stock (F22A1 - V TEC)
-spark plug wires NGK

NOT INSTALLED
-AEM intake (blue)

Interior

-Swapped interior color from baige to grey
-Painted my dash gloss black (dislike it being gloss due to sunshine reflection that bounces to the front glass, so I'm planning to take it out and repaint it flat black)
-Air freshener (heard it adds more HP so I bought one)

Exterior

INSTALLED
-Euro clear rear side marker lens
-JDM style head/corner lamps
-Euro clear turn signals (bought another one not yet installed)
-Type-R grill (bought another one not yet installed)
-Type-R front lip (took it off due to my wreck but will put it back on after I paint it black this time)

NOT INSTALLED
-Red/Clear tail (I had taken out the amber color lens that was inside of the signal tail piece, it was a bitch to take off, but hey it's worth it though, rather than to buy an after market one)

UPDATES:
-primered the whole damn car (im not liking the silver/gold stock color going on, I went for a charcoal/hot rod grey primer. Let me know what you think.

Wheels/Tires

OLD WHEELS
-15" stock 96/97 EX rims 195/60/15 toyo tires (SOLD)
-15" stock 94/95 EX rims 195/60/15 toyo tires (all painted in black) (SOLD)
-15" stock 94/95 EX rims 195/60/15 toyo tires (after my wreck swaped painted silver ones for the back) (SOLD)
-15" stock 94/95 EX rims 195/60/15 toyo tires (after my Toyo tires got bald with a VERY bad camber wear, I bought a stock polished set with tires, and sold the center caps to buy paint ha ha ha) (SOLD)

NEW WHEELS
-17" Motegi MR7 - 215/4017 (bought them in chrome, but wasn't my taste, so I did a bad paint job in black, then recently painted them silver cause I got bored of the black theme for now)

WISH WHEELS *ha ha ha*
-16" Rota Slipsteams
-17" Rota Sub Zeros

Supension/Braking

INSTALLED
-Tokico Adjustable Gas Shocks
-Skunk2 coilovers
-Megan Racing strut tower bar (SOLD)
-Neuspeed strunt tower bar
-Megan Racing strut bar for the top rear
-Megan Racing strut bar for the bottom rear
-Rotor over hub front brake converssion kit

NOT INSTALLED
-Front/Rear camber kits

COMMENTS
-strunt bars names (Not sure what each bar is actually called? For the top front/rear and bottom rear. Help me out here understand the names for them. All I know they do some what improvements, no?)

--Rotor over hub front brake converssion kit (I LOVE THIS...! A kit that converts your 90-97 pressed on style front brakes to a standard, easy to work with slide on rotor set up. 90-97 Accords have pressed on rotors that make replacing them very difficult because specialty tools are required. Make future jobs far easier and more cost effective. Comes with the bearing already pressed onto the hub for easy installation.)

Audio/Electronics

-stock/stock

Although left front speakers blown so theres nuthin in there. and the other three are gettin blown as well isn't that cool or what?

Future Mods

ENGINE
-DC Sports Header
-Skunk2 full catback exhaust system or Greddy cant decide yet, but I like the Skunk2 because of the silencer they provide, and the deep rich sound.

INTERIOR
-finishing the interior in black grey tone with silver trims.

EXTERIOR
-shaved side moldings
-Tinted windows

WHEELS
-Rota rims (16" Slipstreem or 17" Sub Zero)

SUSPENSION/BRAKES

AUDIO/ELECTRONICS
-install my amp and sub had hat for more than 4 years but it's sitting in my room every since I totaled my first Accord (96 EX Accord 5sp sedan)

COMMENTS
-Any tips and ideas, please let me know

THANKS!

Comments
Posted By: s2kguy07
Date: 11/18/2037
aite ill put the snow pic on there with the big gap between the tire and fender..haha

Posted By: terrynfischer
Date: 05/17/2010
hells yesa man I allways wanted a delorian I would rock the hell out of that car very nice nice

Posted By: boblaze18
Date: 03/05/2010
aye are those deloreans yours????

Posted By: boblaze18
Date: 03/05/2010
i just posted the pic of the accident... I have replace everything in the engine bay but i had to take the car back in due to the shop welding the core on at an angle but i drove to the shop so it almost done.... i got the r34 front bumper and halos for it too and i'm lookin at turbo kit right now...

Posted By: speedy31
Date: 08/19/2009
ya i was so mad when that happened. but as long as i have aa nice car i will always have haters. i think ima take a break from working on it for awhile. whats next for urs

Posted By: EM1guy909
Date: 08/18/2009
my cars doing good.ive recently added a few things like a broadway rear view mirror, spoon carbon fiber side mirrors,short shifter, and a type R shift boot and knob..

Posted By: johnlenh
Date: 08/17/2009
hey man its a mugen rear lip i got off ebay

Posted By: speedy31
Date: 07/20/2009
thats dude. the trunk and hood where alot of money but i had been wanting them for awhile so i desided to save up for them. but i got some haters and they stepped on the hood, my windshield, roof and trunk and cracked the hood by the vent and also they put about a 2 inch crack in the trunk. u gonna paint the car?

Posted By: TEGGY
Date: 07/16/2009
Hey man nice Ride keep it up! Hey you know i have exact same car but in is an LX version i did some mods to it but its not fully done yet so that why i dont wanna post it up cuz i dont want ppl callin me ricer. So man if you would give me some ideas and i got some questions for you . please if u can email me bimmerov@hotmail.com id be glad to talk to you

Posted By: BrutalB83
Date: 07/01/2009
Hey Joe, those door panels look great! Looks like you did a real good job on those!

Posted By: EM1guy909
Date: 06/24/2009
whats up man.read your comment ,dont even trip i didnt take it as an insult in anyway. thnks for the concern..by the way your accord is coming along nice. not to be rude or anything in any way but id go with the stock taillights instead of the chrome ones ,theyd look alot better .just my opinion though..

Posted By: EM1guy909
Date: 06/22/2009
thanks for the comment! yeah i went with the gold rims cuz i wanted something that stands out.lol but i could always paint them another color when i get tired of gold.lol

Posted By: cd6accrd
Date: 06/14/2009
hey bro! one color FTW lol. man the primer grey is lookin fresh and clean. what color are you gonna paint it? those rims are MR7's right? they look good! what other plans you have for your ride? I dont know if you have seen my most recent pics, but I posted them about a month ago.

peace

Posted By: BrutalB83
Date: 06/11/2009
Hey Joe, how's it going? Good to see that you're still working on your ride! Looks good!

Posted By: freddy1992
Date: 05/27/2009
Yo man. I like your honda, its pretty sweet. Hay thanks for telling me about my license plates. Ive looked at the pictures a bunch of times, and never noticed it. Keep on wit your work, hope to see more pics.

Posted By: pata 078
Date: 04/27/2009
If I would have waited one more Month, it would have been 1 year since I've hit you up lol





Been doing work I see. Is that how she Stands right now? Primer Grey? Looks Freken Smooth!



I've done a few things to my Civic after I took off my Air Ride. Check it out.





>Join the Honda Show Off Forum so we can talk about your Accord more. I have some Questions.



Go to the Introductions Section and Introduce yourself with some more pics.



See you there!



>>>Later<<<

Posted By: Ahh Cord
Date: 03/12/2009
To the guy with the user name (97ACCORD-03/07/09 09:32pm ). No I have a stock front lip and Type-R style front lip I bought on Ebay for 75 bucks few years ago. A 94-95 Accord front lip will not fit on a 96-97.

Posted By: LittleMissVtec
Date: 03/08/2009
Hey cupcake :) We will need to meet up and go for some drives together before I sell the civic! xoxo

Posted By: TEGGY
Date: 03/08/2009
are the front lips from a 94 Accord?


Posted By: cd6accrd
Date: 02/24/2009
NEW PICS!!

Posted By: cd6accrd
Date: 02/24/2009
wats up!! looks like u have your very own wheel shop,lol, so hows things going with your car? those 7 spoke ex wheels are lookin good. is that red civic yours?

peace

Posted By: Thalia147
Date: 02/17/2009
ride dropped check it out"""

Posted By: cd6accrd
Date: 09/12/2008
wat up!! thanks for he comments. yea i got the mugen grille on ebay and it was very costly but it was worth it. hey i just put up some new pics with the cf hood and new wheels. i also just got a cf gas door but it is not pictured. come check it it out and tell me what u think.

peace

Posted By: cd6accrd
Date: 07/07/2008
wat up man, i got a new paint job, check it out!

Posted By: speedy31
Date: 06/11/2008
WHATS UP DUDE I GOT NEW WHEELS

Posted By: pata 078
Date: 06/01/2008
I Hooked up my Trunk Layout Again and Even Better. Check it out. >>>Later<<<

http://www.hondashowoff.com/profile.php?id=6252

Posted By: Rprezident
Date: 05/29/2008
THX!The left one is my girlfriend!;)

Posted By: speedy31
Date: 05/27/2008
U GONNA PAINT THE CAR THE SAME COLOR AND HOW COME U DONT GET SOME AFTER MARKET WHEELS INSTEAD OF GETING THE STOCKS?

Posted By: HEART BREAK KID
Date: 05/23/2008
got new whip check it out when its updated thanx. peace

Posted By: speedy31
Date: 05/20/2008
ITS MY FRIENDS MOM AND MY COUSIN. WHAT U GONNA DO NEXT TO UR CAR? IM ORDERING MY RIMS THIS WEEK IF EVERYTHING GOES GOOD

Posted By: 95accordbroke
Date: 05/02/2008
hey man, i like the car body looks like it is good shape, i like what you said about mine and i know i know, i need to lower it. yours looks dam good lowered. well done

Posted By: speedy31
Date: 05/02/2008
thanks man, whats new with ur car? the girl in the tan car pic or the green car pic?

Posted By: JRACING
Date: 04/22/2008
New upgrades on my car Check them out

Posted By: speedy31
Date: 04/22/2008
check out my new paint job and the carbon fiber. tell me what u think

Posted By: NeonNyte05
Date: 03/23/2008
whats good thanks for the love man i got my tint done were im from b sure to tell them how u want it man ur ride is nice love the rims

Posted By: cd6accrd
Date: 02/16/2008
wats up bro!! i finally got the pics with the 94-95 ex wheels and i also found a really good pic took with my friend's car in it. one of the best pics i have taken. check it out and let me know what you think!!

peace

Posted By: speedy31
Date: 01/28/2008
i have a 95 accord and a 94 with a 96 front bumper. what u gonna do with ur car

Posted By: cd6accrd
Date: 01/28/2008
wats up!! thanks for the comment. i got a great deal on the wheels and tires. The visors I got are the original JDM visors made by Honda that came on the JDM Accord SIR in Japan. They mount up with built in clips on the inside of the visors. These dont use that crappy 3m double sided tape. These are very hard to find. I am looking for a Mugen Grille now so that will be the next thing i will get. the ex wheels were dull when i first got them so I cleaned them inside and out and used Mothers Aluminum Mag Polish and polished each wheel about 8 or 9 times. Now they look like new. Also to make the stance of your car look better you should get some wheel spacers. You can get them from a autoparts store or a tire shop. It will make the wheels even up with the fender.Yea I will post up some pics of the ex wheels when I get a chance.

peace

Posted By: nspec
Date: 01/28/2008
sorry to hear about ur dad bro. i can only imagine how it feels like.



to do the taillights, i think it was about 250 or 275 temp. and leave the taillights in there for about 10 minutes.



check on it every 5 minutes to make sure the lens itself doesnt melt.

Posted By: hteles
Date: 01/14/2008
Thanks for the comments on my Coupé! I got my profile updated (new pictures) just because I got new SONAR headlights (xenon kit + angel eyes) and it looks really cool.

About your comment, it´s funny how HONDA of Brazil just imported Accords from the Marysville/OH factory, but they came in some different exterior configurations (some didn´t came with fog lights at all, some like mine didn´t have the side rear lights but came with front side lights, etc...).

And you know what is cool on imported Accord here? They com with a nice black metal shield in which comes a proud eagle and below "Honda of America". This looks killer compared with other Honda models. Just with american imports.

You cars look mean, uh? Well, nice rides man! They look nice and mean! Keep them that way! Congratulations!

Posted By: 34343
Date: 01/02/2008
There smoked housing. Wat do u mean site code on my tires?

Posted By: speedy31
Date: 12/03/2007
hey i finally got pics of my other car. have u done anything on ur car

Posted By: cd6accrd
Date: 11/09/2007
wats up bro!! it been a while since i heard from ya. hows the car? dude, i finally found some very nice 94-95 ex wheels for 200 w/o tires. when i get tire i will take pics of it on my car. i just fully cleaned and scrubbed the whole interior and it looks like a new car inside now. that turtle wax interior1 cleaner works really good for stains. i also just bought some JDM accord door garnishes for like $47 shipped on ebay and they were in very nice condition, they usually run for about $110 shipped. so what are you gonna do next to the car?

peace

Posted By: nspec
Date: 11/03/2007
hey man. its been a while. and haven't seen any updates on

ur car. whats new?

Posted By: speedy31
Date: 10/09/2007
what r u planning on doing next

Posted By: speedy31
Date: 10/09/2007
Im selling it because i need money and im working on another accord.

Posted By: speedy31
Date: 09/29/2007
hey whats up man , have u done anything new to ur car

Posted By: hahakenny
Date: 09/28/2007
Thanks man, I'm not doing the Manual swap at this time though. I got kids on the way and with this kinda traffic here, it's best I keep it Auto.

Posted By: speedy31
Date: 09/11/2007
Im not sure what your talking about?

Posted By: HEART BREAK KID
Date: 09/06/2007
hey ur accord looked nice and those black wheels u had looked nice they look like type r wheels those slipstreams will look nice on the car they r only like 250 the ones that look like them they r kalled speedy's and look lexactly like them they r either 200 or 250

Posted By: cd6accrd
Date: 08/23/2007
wats up!! what kind of wheels are you getting? My Acura CL wheels are 16's and they look just right with a 2 inch drop. Make sure you get tire siz 205/50/16, they may be hard to find but they are perfect for 16"s. Im trying to get my front bumper painted, but now that school has started back, it may be a long while before do that. Man its been a while since i have been on here. Between work and social life i havent had much time to update my profile, but i have been working on my car. I just bought a VIS cf hood, cf gauge bezel, tint, wheels, and some tokico hp shocks. Just took new pics with the tint and wheels. check em out when you get a chance!!

peace

Posted By: speedy31
Date: 07/16/2007
Im inserting the gills into my fenders, im custom making a new grill, im moling the front lip to the bumper, im going to start doing all the body work to my car and i wanna paint it some kind of green. you got any good idea of what i can do to it

Posted By: BrutalB83
Date: 06/28/2007
Oh no!! What happened to your ride dude?? Is it going to be allright or is it done for??

Posted By: speedy31
Date: 06/25/2007
Hey bro thanks 4 all the input on my car. i do wanna change alot of thing like i wanna paint it green or blue and take out all the yellow. its just so hard to keep a clean body on the car these days because people being jerks and hiting it and all the haters trying to break into it. anyways i want to make it a show car.. Have u put anything new on ur ride?

Posted By: JDM PANDA
Date: 06/19/2007
hey bud whats goin on? yeah i had to re make my old one because somethin happened to it. and also to get back to it you have to search it through honda_accord_1994 rides. if you click on the username link it will take you to a phony account. i dont know why. i also put your screen name on my list so next time you sign on ill hit you up! but go back to my pro i have a bunch of new pics up! and i will have more when i find my camera. as for the rims i got way tired of them so i ditched them for 25$ total with good tires on them. oh well my loss there gain, but i didnt really need the money. i see your located in socal? where abouts. im in the nine five one area :) are you in any cd clubs? if not i can hook you up!

Posted By: jestic
Date: 06/17/2007
Sup. New account, yes. Not gonna be making too many more changes. Wanna fresh start and try to keep away from all the negativity and haters. I put my Acura Integra on here too now. how you coming with your mods.?

Posted By: 95AccordEX
Date: 06/12/2007
I used Vinyl and Fabric Interior paint from autozone, and it peeled so easily, even though I prepped it with 2-3 primer coats, paint, and clear, still wasnt good enough. But its no big deal, most of it is still holding on. I'm plannin on redoing it with this Krylon Fusion spray.

Posted By: sebastien
Date: 06/12/2007
just let me know when you whant it and i will loke for you because my car has the acura 1.6 el int. that's why i have the seat belt black mine was grey peace bro

Posted By: mediison
Date: 06/11/2007
how's it going.? i haven't heard from you. what's next.?

hollar back.

m.

Posted By: sebastien
Date: 06/05/2007
nice ride man if i can help you whit any thing just ask me did you find your black seat belt because i can help you i got some on my ride peace

Posted By: BrutalB83
Date: 05/21/2007
Hey man, thanks for the comments on my Teggy! Yeah I need to install my suspension and get some new pictures up too! Then I just need to pick out a nice set of rims, get my Mugen-style lip, and maybe a carbon fiber hood, and the Teg will pretty much be done.

Yeah you should get some new pics of your ride too man. Are those the JDM SiR style headlights I see? Looks pretty tight man, keep it up!

Posted By: nspec
Date: 05/20/2007
man i still gotta do so much work on it. i gotta replace the windshield, change the front rotors (which is a huge pain in ass). i'm thinking about just doing a 5 lug coversion, cause it'll only cost a few hundered extra. I just dont have the money to do it.



oh yeah, yesterday, i got some real HIDs from a friend and put em on. They are awesome. I'll upload the pics soon.



and dude, u should get the car painted the same color, but get a silver base coat. that will make it shine like candy paint.



and check out this auction:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=001&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=110122689038&rd=1,1



i'm probably gonna get those for my front seats later on.



but anyways. i'll talk to u later.

Posted By: cd6accrd
Date: 05/12/2007
thanks, but i really want to get it painted, it was cool for a while now i am getting tired of it. i am still waiting on my tax return to come back so i can get the car repainted and dents taken out. i decided to stick with the original color sage green metallic. you dont see many accords that color thats jdm'd out so it would be different.so are you thinkin about sellin those wheels?

peace

Posted By: mediison
Date: 05/08/2007
sup b. got more upgrades.

you know me, no body kits, no turbo's, no NOS.

lean/ stock and clean.

changed the mods list around too.

i hope i got it straight.

peace..

Posted By: mediison
Date: 05/08/2007
yo b. i'm upgrading.

trying to get it right.

no body kits, no NOS, no turbo's.

clean and mean...

hope you get back soon...

Posted By: cd6accrd
Date: 04/29/2007
wats up!! yea i like the silver ones the best. My email address is clewis_21@hotmail.com, email the price if you are going to sell them!! Gen5 is pretty cool i havent been on there in while. i need to drop by there to see whats up.

peace

Posted By: Ian77
Date: 04/17/2007
Hey Joe. Thanks for the comments! My tires are 225/45/16. I really like the handling and I didn't want really big wheels like 17 or 18's. Rota's are awesome wheels. Keep me updated on your ride.

Posted By: cd6accrd
Date: 04/16/2007
hey wats up man!! thanks for the comment. if u do decide to sell your wheels, please let me be the first to know because i am lovin those wheels. give me a reasonable price and i will buy them.

peace

Posted By: cd6accrd
Date: 04/10/2007
whats goin on man!! i was thinkin about getting the same coilovers and struts you have, but i think i am just going to get the tein basic coilovers instead because the skunk2 coilovers and tokico shocks would equal the same cost of getting the teins.lovin the jdm headlights and the 94-95 ex wheels thats painted silver,that looks sick. I know its been a long while since u asked for a side view of my car,but i finally got one posted,lol, oh, btw i posted pics of the new fogs and mugen lip check it out when u get a chance!!

peace

Posted By: speedy31
Date: 04/08/2007
Nah man i wasnt in a wreck, i just painted the hood black because it was all messed up and i didnt wanna spend money repainting it cause im waiting to get the carbonfiber hood. So what u gonna do next to ur car.

Posted By: johnhinson
Date: 03/31/2007
where did you pic those ex wheels up from?? i need some bad

Posted By: caint steezop
Date: 02/26/2007
Thanks for the comment, Friend. I thought this would be a fun upgrade; I did it myself with twelve dollars and about an hour per speaker. I took off the rear speaker panels from the trunk (the front door speakers take a little more labor becuase you have to take off the door panels). Then I went to Goodwill and found a good sized garment to cut up. I thought plaid would be cool, but you see I didn't end up with that. I took some black cloth to go under my dark lace and hot glued it, one piece of cloth, then the other, over the original cloth on the speaker. Glue it in the back and make each part kind of tight. Really easy, almost zero moneys, and dope as all getup.

Posted By: cd6accrd
Date: 02/12/2007
does your car have a good ride with the skunk2 coilovers and the tokico shocks? I was thinking about gettin the same combination.

Posted By: cd6accrd
Date: 02/09/2007
Hey whats up man! Aint heard from you in a while. I just got a mugen style twin loop muffler. I posted new pics! Check em out when u get a chance. O, btw when are you gonna post some new pics? I wanna see ur new headlights!.... peace


Posted By: Civicz_R_UsZ
Date: 01/23/2007
Thanx man for da comment... I like your ride. I dont know wat it did, but i have multipal accounts on here. anyway tell me if i should keep my accord or get da 91 civic wagon that is being sold to me for a good deal.. One again I like your ride.. Keep up the work...

Posted By: nspec
Date: 01/15/2007
man i know it sucked. my car has been sitting at the shop for about two weeks and the insurance is telling me that they are still waiting on the police report. hope fully my cost shouldn't be more than 1500, but my insurance is paying me enough to cover it and i'm getting to keep the car. the rest of the money, just like urs, will go towards my bills.

but any ways, how is ur car coming along? take my advise. dont buy any more little performance stuff for your car cause they wont help at all, unless you already have a built motor or a turbo kit. I just wish i would have know all this before i went and spent so much money on the extra part. all that could have paid for the half towards the new motor.


Posted By: JDM PANDA
Date: 01/07/2007
haha no im originally from california and thats where im living now. all my family is out here. its just alsways been a dream to move out of the united states and i love england. i love history and culture and learning about them and i always wanted to move to london so when i do ill be out there by myself lol. i plan to travel around europe and visit japan maybe stay there for a little bit but for right now london is my goal. thanks though i really appreciate it.

Posted By: s2kguy07
Date: 01/05/2007
get ur car back yet??

Posted By: JDM PANDA
Date: 01/04/2007
haha my new plans arent anything car related lol. infact im temporarily/semi-permanetly done with the car thing for now. maybe ill pick it up later on. but as for plans im moving to london in a couple of years so im getting a few things together

Posted By: 95AccordEX
Date: 12/20/2006
hey still looking for some black housing headlights? got a set of depos im selling.

Posted By: s2kguy07
Date: 12/15/2006
just ordered the seibon oem cf hood :)

Posted By: cd6accrd
Date: 12/11/2006
hey whats up man, i put up some snow pics, check em' out!

peace

Posted By: s2kguy07
Date: 12/10/2006
haha well i just looked at ur pics and yea ur hoods bent lol

Posted By: s2kguy07
Date: 12/10/2006
welll i think for the 4th time. the person backed out haha. dude if ur hood got bent then get a cf hood if insurance is payin for it it will be cheaper bec the body shop doesnt have to paint it!! isnt that a great idea i wish someboyd would hit the front of mycar i need a cf hood, jdm black lights and blinkers, cf front grille, and cf lip!! haha

Posted By: s2kguy07
Date: 11/29/2006
plans changed again joe, my cars sold getting purchased dec 21st.



s2k time

Posted By: nspec
Date: 11/28/2006
hey man. i'm gonna be selling my headlights pretty soon, (as soon as I get me custom ones ready) plus i'll throw in the clear side markers and the clear front bumper. let me know if u are interested. i wanted to let u guys know before i put'em up on ebay for sale.

the only thing u might not like will the corner the passenger side corner light, that was repaired.



so here is what will be included:

- black housing headlights w/ corner lights. w/ Sylvania Bright White light bulbs included ( just those alone were like 40 bucks and both are new.

- clear front bumper lights w/ some nice blue bulbs

- clear jdm type fender lights.



look at my pictures to see whats included.



i'll email u more if u need em.




Posted By: JDM PANDA
Date: 11/20/2006
got all new pics up!

Posted By: JDM PANDA
Date: 11/12/2006
yeah i got a new pic up with justins ride right next to mine. haha see how much lower mine is compared to his ;)

Posted By: s2kguy07
Date: 11/10/2006
ya i think were goin to a parkin deck sat night to take pics we will post them

Posted By: JDM PANDA
Date: 11/08/2006
haha yeah its rough. i just ordered a mugen front lip for 3 day delivery so hopefully that will be here fri or sat and my red lugs just came in so those are goin straight on and we are takin pics as soon as my lip comes in and we are doin it in a parking garage so it will be tight yo! but ill deffinitely let you know when they are up

aaron

Posted By: cd6accrd
Date: 11/03/2006
whats up man, dont feel bad, im rockin no tint too LOL, hopefully i can scrape up some money to get that done, oh btw did you check out the gen5alive website yet. let me know what you think of it

Posted By: JDM PANDA
Date: 11/02/2006
alright dude i got the new rims pic up. its still goin to be a while before they are on because i still have to order tires and what not

Posted By: s2kguy07
Date: 11/02/2006
thanks man! yea its the same intake thats the intake off my old motor. the header fits too..well thats the h23 dc header but we had to cut like 3 inches off the downpipe. at first i had my car sold for 10,000 but he never showed up to purchase it after i had my title and everything ready but then people were lik ehey ill give u 7 or 6 and i was like psh screw that ill just boost it and be fast that way haha

Posted By: JDM PANDA
Date: 11/01/2006
hey dude real soon im puttin the rims up on the market. i really like them i just need to get something a little different for my car so in a couple of weeks lol around 4 im ordering rota circuit 8's in 16" with glossy black finish with a chrom lip

Posted By: cd6accrd
Date: 10/30/2006
hey whats up man, thanks for the comment, your ride looks good too. Good job on the wheels. those are clean.

Posted By: JDM PANDA
Date: 10/29/2006
lol yeah dude your cars both of em look so clean. but yeah CD6s are becoming kinda a rarity with JDM stuff. but yeah i know what you mean . scrape galore with my ride haha so much so i had the performance shop custom make me a scrape gaurd unders the engine and headers and all new custom tubing for everything because of scraping. im tryin to go lower but my front two coilovers the lock bolt and the adjustable bolt are both jammed and i only have one wrench lol

Posted By: JDM PANDA
Date: 10/25/2006
you should deffinitely try to slam your car down :) like mine. but if you do have a performance shop custom weld on a skid plat on the bottom of the headers to save you from scraping :) i learned the hard way and had the shop custom make me new header piping to fit on my DC header and they also made me a single pipe for the exhaust to go from the cat all the way back but yeah :)

Posted By: JDM PANDA
Date: 10/25/2006
yeah dude deffinitely

Posted By: dpopdxa
Date: 10/24/2006
Well most salvage titles are easy to fix! Just going down to the DMV you can ask for Branded title which you just pay a bit more (its a bit better then the Salvage title)! Most of my cars that we fix we do that to them! if you get a salvaged title then thats when you can get screwed on! Mostly by your insurance!



some of the insurances wont let you get full coverage and if the insurance does let you! in case you crash you lose 20% of the value on them! That happen to me once!



The white hatch is the one i fell asleep on!

That pissed me off! I was about to sell it that same week, having 3 different offers on it! that was really nice!

Posted By: dpopdxa
Date: 10/22/2006
The other hatch i fell a sleep at the wheel! and this one is a salvaged title whiched i fixed and finshed the job! an not bad on your car like how it coming along! keep us posted

Posted By: JDM PANDA
Date: 10/21/2006
you know those arent the stop rims on my car right? lol those are the slips knockoffs i bought off of justin temorarily untill i do get the slips

Posted By: s2kguy07
Date: 10/21/2006
guy backed out so im def keepin it now, i put that shift kit on it and its crazy sweet ill take some pics of it and post them

Posted By: s2kguy07
Date: 10/16/2006
hey whats up man i totally forgot to take a pic of the wheels and i sold them but my buddy bought them and he has a hso accound his name is ProJect_CD7

so ull c them on his car. as of my car bein back in progress im about to dump a lot of money into it but now it might be sold....again but i just ordered a pspec tuning shift kit that was like 250 so if i sell my car would u be interested in buyin it for like 200 bec i dont wana have to ship it back and pay the re stock fee

Posted By: s2kguy07
Date: 10/13/2006
accord back in progress! :)

Posted By: s2kguy07
Date: 10/01/2006
i dont have any pics but i can take some lol


Posted By: nspec
Date: 10/01/2006
hey man. i was going pretty fast, but it felt like i was dead stop cause there was no more acceleration. it couldnt produce any more power, just enough to keep up with the speed. and that was before the exhaust. if u notice the tach. it only says 5k rpm and the max i went was 127. if i had a better airflow, it probably would have gone up to 6krpm and gone up to 135mph.



and about the grille, my camera is messed up right now. all the pics i have on my page were taken by my cell phone. as soon as i get my hands on a camera, i'll take the pics.

Posted By: nspec
Date: 09/28/2006
hey man. i'll put the pics up when ever i get time to take em. i just installed the apexi ws2 exhaust system today. check it out.

Posted By: s2kguy07
Date: 09/28/2006
slip knockoffs dont kno what size tires are goin on them bec im not keepin them. gettin a s2000

Posted By: s2kguy07
Date: 09/25/2006
hey man, there isnt much of a diff..no rubbing or anything rides the same. the tires are really really sticky but dont last long bec they are a race compound tire

Posted By: GeTinLine
Date: 09/10/2006
man, i hope you strip that flat black paint off those nice ex wheels. i suggest you repolish them. and please get rid of that flat black painted hood, you should of just left it alone. i know you were trying to go for that cf look deal, but that flat black looks like you been in a wreck.

Posted By: jdm itr civic
Date: 09/06/2006
Hey man, wats up. I swapped the two motors in the two cars, and they are both running great. I had hit a road block in painting the coupe when i found major bondo on the rear quarter that needed to be replaced and right about that time this hella good deal came about with the hatch and i couldn't pass it up, so i decided to buy it , switch the motors, and the coupe will be painted black and be my daily driver.

Posted By: jdm itr civic
Date: 09/03/2006
hey mand, wats up, check out my new ride.

Posted By: 97ferio
Date: 09/03/2006
wow mad props man


Posted By: RedBadAzzGyrl
Date: 08/25/2006
JOE!! LOVE THE PICS!! Sorrie, it's been awhile checkin' in n out hondashowoff. I felt BAD!! now Im BACK, baby!! Summer is almost over n now it's time focus our baby!! *wink* work hard n get more $$... Lets get our RIDE PIMP UP!! Good job on ur ride, keep it up!

Bethany *wink*

Posted By: GeTinLine
Date: 08/18/2006
no new pics. take better pics with a better camera.

Posted By: nspec
Date: 08/10/2006
hey joe. whats up. havent heard from u in a while.

i've got a question for u. do u have any info on how to do a 5 lug conversion on our cars? let me know. it'd be great.

Posted By: inferno
Date: 07/23/2006
its the color from the G35

Posted By: aznpnoyracer
Date: 07/21/2006
I put some vaseline (petrolium jelly on the letters very carefully not to get it on part that I want the paint to stay, then I just casually paint over it the once the paint is dry I just take a razor and cut the out line of the letters then I scrape the letters off. cool trick huh.

Posted By: CD5acrd
Date: 07/20/2006
To aswer the question you asked on N_specCD5's page, CD6 is the chassis code for JDM 94-97 Accord SiR (2.2L DOHC VTEC)sedans. The other chassis that I do know of CD3 is 1.8L 94-97 sedan, CD4 is 2.0L Sedan(not sold in the USA) CD5 2.2L sedan (sohc vtec and non-vtec), CD7 2.2L coupe (sohc vtec and non-vtec) CD8 Accord SiR coupe (2.2L DOHC VTEC also not available in the USA).

Posted By: aznpnoyracer
Date: 07/19/2006
love your car man, very clean. check mine out I just did my valve cover, tell me what you think of it.

Posted By: pata 078
Date: 07/15/2006
Hub Adapter is what I need for my Steering Wheel That I got...... I just had a few set backs with my New Tires and my Axles so I'll wait till I have some Extra Change to get my Hub Adapter for this Nice Cheap Steering wheel that I got for my Civic....... There's this Bad azz Momo steering wheel that I want to get, but It's like about Two Fifty and That One I will get but like I said Untill I get some change Put Away then I'll get it.....

My Door Pannels is Vinyl Red W/ Carbon Black and I painted the Arm rest and the latch to open the door only..... The Seat Belts You could paint but I wouldn't try it cause it'll probly not be worth it, and I don't know what other honda has black seat belts but I am Looking also...... A lot of people Talk a lot of Sh!t of that Dupli-color cause some peple paint a lot more than they're supposed to and then everything starts fadeing or scratching off and stuff!!! I just used it on some areas so I think you should Consider that too....... If you know how to remove your dash,, than it would be better to go get it done rather than painting it =/ >>>Later<<<

Posted By: pata 078
Date: 07/13/2006
Dawg, If you look closely at my Interior Pic Before and After I painted my Sun Visor Black!! I removed my sunvisors, I took my Monitors off and spray painted them, let it dry, and the next day, Put my Monitors back on and Reinstalled them back on.... There's this spray paint that AutoZone sells or in any autoparts store I think, it's Glossy Black and it's for Fabric and Vinyl from DupliColor. Dawg that was my Best Friend when I started Hooking up my Interior!!!! You can Paint the Carpet too, I did, but That will wear out with time Untill you take all your seats out and get a black carpet.... I even painted my Steering wheel =/ But again it wears out cuz your Rubbing it a lot. I have a new steering, I'm just need My Hub adapter....... Do not use regular spray paint cuz it will peel off or crack!!! They come in other colors too.... But I'm Telling you Dawg, I think that Fabric and Vynil Paint did me Justice. I'm extreamly Satisfied with My Interior. I paid a Total of $800 for all my Interior, But If I would of left my car there at the shop it would've been $1,400, Yup! I pulled everything out of my Civic and took all the Seats to One Shop, and the Dash (which was a B!atch I might Add) and my Door pannels I took to another shop cuz the first shop only stitches...... Any Custom Upholstery shop will Stitch any way you want Dawg, But One Thing I can advise you on is to shop around and see who can do it cheaper and also see who does better work!!! Cuz I know that this is one Investement you will Never Regret,, If it comes out good Though!! >>>Later<<<

Posted By: 95AccordEX
Date: 06/29/2006
im thinkin bout switchin my taillights back to the oem and clearin out my orange reflector 2, but yea the front end with the civic springs bounce alot so im taking them out soon enough, jus a temporary drop to see how it looks, and on the tint, im not sure wat percent it was, the front lip is look nice so far, keep up the project

Posted By: min-kape
Date: 06/28/2006
No matter how hard you try, youre not gettin pics of the girl w/ the car lol

Posted By: s2kguy07
Date: 06/25/2006
i havent decided yet. im kinda off and on. i really want a s2k, so who knows im not gonna take less tan 10,500 for my car tho. im gonna sell it as is so i guess ill just have to find the right person to buy it

Posted By: min-kape
Date: 06/20/2006
kyle refuses to post the pictures that he has of me posing on his car lol... but yeah we have some for sure... that was the first thing that was on his mind!

Posted By: nspec
Date: 06/15/2006
i've put the pics up already.

Posted By: nspec
Date: 06/09/2006
i'll take the pics when ever i get time. most of the time i have time, but i forget about it. i'll post em as soon as i take them.

Posted By: LauPro
Date: 06/06/2006
Hey man, thx for being interested in my car... your doing a good job so far, its looking awsome. i did paint my interior, but only the dash, and the door panels... the material in my door panels (fabric) was changed to vinyl... and pretty much anything that was stock material, is changed to new stuf... like racing seats, new carpet etc... they sell special paint for vinyl... just be carful that theres no armorall or cleeners on the vinyl when you paint it!... anotho trick, is to use lots of clear coat. Good luck!

Posted By: min-kape
Date: 06/05/2006
the crx is my car(Katie's) and the civic is kyle's car, we just have our cars on one profile.

Posted By: flaco2
Date: 06/04/2006
oh and on color i think bronze, gunmetal, black or polished aluminum look good and if u want to be different do red with a polished/chrome lip i think thall make u stand out some...

Posted By: flaco2
Date: 06/04/2006
ey wassup bro i got 15'rotas the tires are 195-50-15 an there falcon ziex in my opinion i like 15 and the bigget ill go is 16 reasons #1 its lighter and i think its less stressfull on the car (less weight it has to pull around) lol and 2 its a smoother ride then 17's in my opinion i had 17's bbefore and i had to get rid of them because its suck a ruff ride but everyone has there own opinion u know but thats just me but clean accord by the way keep it up rep points given.....

Posted By: nspec
Date: 05/31/2006
pics of headlights?

Posted By: fm_acura6
Date: 05/27/2006
no, they dont change colors man!!! so i would go for them too... im definately jus trying to keep up w/ engine maintinence and going to try to start cleaning up the exterior...pop all dings out, paint job, and hdlts...wheels once i can!!!later man

Posted By: Snowflake
Date: 05/27/2006
the neons on my page!!! iono how long though

Posted By: fm_acura6
Date: 05/24/2006
hey man, the reason for trying the ceramics is, yes, the color change, also ive heard they dont heat up as bad and also bc the 1's i have on right now make a whistling sound that doesnt sound that good. but theyr not bad. but if you can...go for the DC ceramics. later

Posted By: nspec
Date: 05/21/2006
hook up the vtec light yet?

Posted By: hahaha
Date: 05/17/2006
yea do an h22 then cam gears underdrive pulleys intake headers fuel regulator and you might hit bout 230hp to the wheels cause my guy has an h22 accord

Posted By: prsportychic
Date: 05/16/2006
Hey JOse, I got a 2003 Mazda6 !! Beautiful!!

Posted By: nspec
Date: 05/08/2006
http://www.stock2shock.com/download/OtherMods/Universal/Making%20A%20VTEC%20Indicator%20Light.doc

Posted By: nspec
Date: 05/08/2006
http://www.stock2shock.com/download/OtherMods/Universal/Making%20A%20VTEC%20Indicator%20Light.doc

Posted By: Rome
Date: 05/04/2006
Hey wats up mayn?! thanx for the comment! Dope car dude! Hey i got some questions about clear corners. I jus got some JDM black housing Clear Corners...nd im new to this car game thing nd i was wonderin do i need an inside lense to get that good JDM style lighting? or do i jus stick mah bulbs in der nd das it? lemme know mayn i got some more questions..email- xespionage03@yahoo.com aim-daymitsrome

Posted By: s2kguy07
Date: 04/27/2006
h23 2.3 si-160hp stock (mine is fully built..ported polished..blablabla so i dunno what i have)



h23 2.2 190 hp



i have a dig camera so whenever i get the car done and runnin right ill email u a vid

Posted By: s2kguy07
Date: 04/25/2006
haha its all good...the h23 is 160 hp stock..only put that motor in if u are planning on boosting your car..the h23 is a great motor to boost

Posted By: s2kguy07
Date: 04/22/2006
oh yea....









its fast as *****!

Posted By: s2kguy07
Date: 04/22/2006
biggggg difference i actually got to really get down on it today and that motor sounds amazing its really loud..the exhaust is quiet bec its the apexi ws but it backs off and pops a lot...i really like it

Posted By: Snowflake
Date: 04/22/2006
dude it's andrea I got a neon and painted her floresent pink!!!! I'll get pics soon!!! It's gorgeous!!lol muhahaha

Posted By: s2kguy07
Date: 04/21/2006
yea bad seals if its the front main then the motor can stay in but yea when i drove it it sounded awsome and was fast im happy haha

Posted By: s2kguy07
Date: 04/20/2006
yea so i drove the d@mn car and its leaking a half court of oil out of the front and rear main seals like every 15 min so that means the motor is commin BACK out

Posted By: nspec
Date: 04/20/2006
lol, whats up w/ that red accord? all different rims?

Posted By: s2kguy07
Date: 04/18/2006
the f22 tranny...bolted right up

Posted By: s2kguy07
Date: 04/11/2006
yahh the swaps goin good..i knew there would be a few problems but now everytihng should be fine...theres a lot of mods you gotta do to make the motor work correctly



1. crank sensor out of oil pump, and the crank gear..problem-when the crank sensor and larger crank goes on the h23 that means the h23 timing belt wont fit because of the larger crank..what i did was got all the measurements from the belt and went to dayco.com and put them in their belt calc. and it randomly gave me a belt number and i went to advance auto and got the belt..(it took about a day to figure that out) then i had to use 97-01 cam gears to make the motor turn over and be timed up right because of the larger gear...



2. now i have larger cam gears the valve cover wont fit because the gears are too large, that means i have to cut my valve cover



3. need to get prelude header and mod it..gotta use the flange off the stock accord header and put it on the lude header..then cut 3 1/4 inches off the downpipe to make it fit..im using a obxr resonator as my cat and also gotta drill a hold for the o2 sensor to fit..



4. i bought a aem accord fuel rail and it wont work like it was suppost to..so luckly i had a 97-01 obx rail witht he motor and i used that with a little fab.



5. go to hasport.com and get a custom h22/h23 swap mount for a accord...about 140 bucks...



6. need to get a power steering bracket off a 92-95 lude and cut the end off it so it will clear the pump. (i got the last remaining new bracket in the u.s. from honda) so will be hard to find one.



that should be it for now but im sure im forgettin stuff haha ttyl man

Posted By: s2kguy07
Date: 04/10/2006
h23 comes out of a 92-95 prelude si..160 hp stock..yea today def ran into a lot of problems swaps arent fun anymore haha

Posted By: nspec
Date: 04/07/2006
paint it gloss black. not like the one u have right now.

Posted By: nspec
Date: 04/06/2006
hey joe. i have another suggestion. u can paint ur roof black too. to match ur hood and trunk. i'm pretty sure that will look much better. but ur choice

Posted By: 69ninja
Date: 04/04/2006
hey man whats up? I have 2 say..your ride has definate potential. Have you put the cut out piece on yet? No time like the present. Thanks for the nice comments. Later

Posted By: pata 078
Date: 04/04/2006
D@@@@@@MMMMMN!!!!!!!!!! Did you notice this Accordguy 97 is hardcore in the future.... Look at the Date he send it "2037", what the hell???? Anyways that was kind of trippy.... Don't be afraid to post some progress pics of your Interior!!! I would like to see...... what color are you going with??? >>>Later<<<

Posted By: nspec
Date: 03/29/2006
the first pair i made came out with bent lens and bent housing. i heated it up too much. in the second one, the ones that i have right now, i some how got a crack in the bottom corner of the pass. side taillights. but any ways, "trial and error" n thats how u learn

hope this was the info u were looking for.

Posted By: nspec
Date: 03/28/2006
i placed them in the oven for about 15 mins at about 250degrees. Dont try it unless you have money to buy like 2 new sets. This is my second set. I messed up on this one too, but you can barely see it. I might get a new pair and work on those. But trust me, dont try it unless you already have like another set sitting around. Later

Posted By: pata 078
Date: 03/28/2006
I forgot to let you know,,,,,,,, My Interior so far has cost me about $800. I still need some other stuff to do in the Trunk. I got my HeadRest already, and I just inserted my 7" Monitors!!! Check it out... >>>Later<<<

Posted By: mrjoker1us2
Date: 03/27/2006
the belts im looking for in red too mine are them ugly azz stock color,the interior set me back $1200 it's a CF red/white im looking for the rubber seals around the doors in red

Posted By: pata 078
Date: 03/27/2006
The Red on My Interior is Vinyl fabric... Everything Red In my Interior is Vinyl and the Black is Carbon Black. As you can see in my Progress Pics, I pulled out the whole Dash to get it done. They use some type of thick glue that they spray on. They took like 3 days cause he was busy as hell!! If you take your car to a Upholstery shop, They might charge up to $400 - $500 for your Dash Alone!!!! At least that what My Upholster told me.. So I decided to pull it out myself, along with the door pannels, and seats. My Dash was $150 RED with the AirBag top cover Carbon Black. My car didn't even have an AirBag on the Passenger Side!!!! The fan vents are spray painted Gloss Black with Fabric and Vinyl Paint from an Auto parts store. I bought like 3 or 4 cans of that to cover the front section of the Dash, vents, pillars, and the Rear top of the speakers. I sprayed them a few times and dries pretty quick. I'm almost done with Interior, I still need to do the ceiling, (another pain in the @ss) that will get done Carbon Black. That Carbon Black stands out big time with the Red. You can't really tell that good in the Pics, But once you whipe it down with Vinyl shine, Wow!!! That's why I think - everyone thinks that it's paint, IT"S NOT. Thanks for the comments. I think Starting from the Dash will help a lot. There is nothing to be embarassed about. Trust me, you don't want to looks Half@ss. It's the best satisfaction feeling I've had so far. Along with my Air Ride....Give us some Progress pics, like you do with the other stuff you've been doing. I think that Kinda Neat!!! Take your Sweet @ss time if you want to look good... What color are you thinking about doing you Interior??? Hit me up with progress pics >>>Later<<<

Posted By: prsportychic
Date: 03/24/2006
Hey Jose =) I have recovered from my accident. They have given me a bit over $13,200 for my car. I am planning on going to a dealer auction on friday to get another car. I am thinking about an accord....not sure though. Any suggestions. I know I want a coupe. ttys



~Nina

Posted By: garret
Date: 03/24/2006
its the external msd blaster coil. why did you take the lip off? LOVE the black wheels, how did you paint them


Posted By: nspec
Date: 03/19/2006
a few more comments about ur car:

I havent seen this, but I think if you paint part of the tires w/ rims, like high gloss black, that way, ur rims might look bigger. lol, not sure about that

and also, about those shaved door handles, dont do that. Ur car wont look good without ur handles or the molding.

and 3rd, about ur lip. If you can, sell this one and get the mugen lip, like accordguy97. That should only cost you about 50 bucks more.

Hope this helps you out.

Posted By: nspec
Date: 03/19/2006
whats up! I heated them in the over for 1/2 hour at like 225 F. Then used a flat head screw driver to take the lens off. This was pretty hard the first time, but I have already made a second pair. And i'll post the pics up soon. Later

Posted By: krayzie
Date: 03/17/2006
YEAH...REALLY I DON'T WANT TO SELL DIS BABY, BUT HAVE 4 CAR...ALSO, NEED MONEY FOR SCHOOL..THANKZ..

Posted By: sipimp
Date: 03/14/2006
well im also a mechanic and i would definatly opt for the H22 over a porche, the money you would spend on getting a porche even a used one is not worth it compared to getting your own motor and then working on it and putting it in yourself its just alot more fun. good luck

Posted By: 92AccordLX
Date: 03/04/2006
hey whats up Joe, na my front windows arent limo tints, i think my fronts are 25 or 30 % and my rears are about 10 -15, im not sure on that tho, it was so long ago and i got bad memory. ill look into it n let u know bro..take care

Posted By: civicprynsess
Date: 02/25/2006
thx for the complement hun, msg me on myspace some time ttyl. nice car!!!

Posted By: nspec
Date: 02/21/2006
Hey Joe, have u primed ur car yet?

Posted By: prsportychic
Date: 02/17/2006
yup, I was in an accident. stupid lady coming out of a driveway didn't f**king look.

Posted By: prsportychic
Date: 02/15/2006
Hola Jose ... LoL "nada, muy no hablar espanola " is "No hablo mucho espanol". If that's what you're trying to say. Ha! Yeah, Spanish is a Romance language. You can definitely get a girl's attention. It's never too late to learn! I was born in Puerto Rico but I've lost a lot of my skills. thanks.







~Nina





Update: this stupid lady yestderday came out of a driveway onto a two lane route from thee right. She was let pass by a car on the right lane. I was coming on the left lane and I guess she figured she didn't need to look and CRASH! I was taken out by stretcher. I am in pain and have a chest contusion and a hip strain. I am soooo mad. They police said it was completely her fault so hopefully she'll pay for all the damages and for my hospital bill. I cried my heart out. =*( I have to see if they can repair the car.



shaken,

Nina

Posted By: BrutalB83
Date: 02/13/2006
I'm pretty sure that the US H23 does have two cams, it just doesn't have VTEC like the H22 does. That's pretty much what it is, a non-VTEC H22 with an extra .1 liter of displacement. Think of it like the H22 is a B18C and the H23 is a B18B, basically the same thing, but no VTEC.

Maybe you were thinking of the F23? That is the motor that they put in the 98-02 Accords, it's got a single cam and VTEC.

I always wonder why that one comment is always at the top of your profile, and I just recently noticed the date on it, LOL! That's funny man, I wonder why it did that...

Posted By: nspec
Date: 02/13/2006
hey man one more thing. how did u get rid of that amber out of ur taillight. i tried and it was a pain in ass. That piece of ***** is so hard to break. Its elastic, but hard as hell. Man I hate that crap. Please let me know how u got rid of it.

Posted By: nspec
Date: 02/13/2006
WTF, did u guys see the date of the comment left by accordguy97. Hes like 31 years ahaed of us. lol

Posted By: nspec
Date: 02/13/2006
Hey man. U need to get a manual CD from ebay. They are about 10 bucks, but will show u everything about ur car. For the bumper, all u need to take off is the front bumper lights, and u'll see four bolts there. And there are a few screws out side too, in the corners and some underneath.

Posted By: BrutalB83
Date: 02/12/2006
Hey I think that guy's motor is actually an H23. I think he said it was a j-spec motor, and the JDM H23 has VTEC...well...I'm pretty sure anyway, lol! He'll have to answer that himself to be sure...but hey your car is looking nice as always! Too bad you had to take your lip off, I really liked it! Later!

Posted By: s2kguy07
Date: 02/12/2006
pic of motor is on my page now, im gonna clean it up and paint the cover with that wrinkle red paint, ill re take pics with a dig camera, the current one is from my phone

Posted By: s2kguy07
Date: 02/10/2006
yea man the motor is bored over, ported polished, diff pistons, rods bla bla bla its def a fast motor, the kid who had it in his lude was runnin in the high 13's with it...

already got a licenses plate idea
4DRLUDE, or H23ACRD..haha

Posted By: s2kguy07
Date: 02/09/2006
hey man im pickin up the motor this weekend! i cant freekin wait

Posted By: prsportychic
Date: 02/07/2006
THank you =) So you're 1/2 bori ...know Espanol?

Posted By: Thalia147
Date: 02/06/2006
Hey,



Thanx 4 the compliment! I am Portuguese and Dominican. To answa ya questions i'm into a little bit of bothracing and show. Bit I like show more cus i like makin the car look good and the way I want. I was thinkin of paintin it sliver not a dull grey but like kind of a glossy look nice and clean.



I definitely want the red and clear tailights and I want to chage my headlights too. I want the JDM 1 piece headlights for that nice crip look. I'm feelin those a lot. I also need to drop it as soon as possible cus i got the 18's so it dont look good lol but i live in boston so i couldn't do it for the winter i am going to wait til the srping to drop it.



I actually wanted the year accord you have but this car only has 47,000 miles on it so it was a good deal. I had a 99 civic but it was totaled! : (

Posted By: nspec
Date: 02/05/2006
The first thing I would say that u need to do is to buy a differnt pair of headilghts from ebay or so. They are about 30 bucks. Then use a heat gun, not a hair dryer to soften the glue thats around the glass. Then cover up the reflective chrome part (The thin, tall chrome bars). Cover them up w/ masking tape. And then paint the whole thing w/ glossy black paint. Dont just get a regular black paint cause that will dull in no time. Or if u get that, then also get a clear spray to cover it up. When it dries, take the tape off and use the heat gun to soften the glue again and stick it back. Dont heat it up so much that it starts to melt. *****, I wish I would have done the same thing instead of buying new headlights. I learned this method right after I purchased them.
The bumper part is pretty easy, I'll tell u that after u get done w/ this.

Posted By: nspec
Date: 02/04/2006
Hey. Just wanted to say about one upgrade that you can do to ur car. It would look great if u get those Black housing headlights. If u have a heat gun at home, then ur in luck. U can use the heat gun to remove the glass and then paint them black. The corner lights go for about 20 - 30 dollars on ebay.

Any ways, just wanted to say what I would do. Also the black housing bumper lights. Both of em would match w/ ur black hood and the rims.

Let me know what u think.

Later

Posted By: civex1021
Date: 02/04/2006
yea man im sure it would be intresting lol accidents blow it was my first one i felt like ***** after wards i couldnt believe it happened but its fixed now so im happy thats all that matters.. hit me up

Posted By: dragyn00
Date: 02/04/2006
holy pictures....i like it....keep up the good work...

Posted By: Kazuki
Date: 02/04/2006
i've looked at bethany's profile b4, seen similar looking civics around.... ya just happened to hav camera in car cuz i needed to take some pics of a car my bro was considering buying, so thats why but anyway, keep me posted

Posted By: Snowflake
Date: 02/04/2006
I got an 85 Pontiac Fiero that I'm about to sell for a 240

Posted By: s2kguy07
Date: 02/02/2006
yea man i cant waitttt, the motor has been professionaly built, diff head rods pistons...ect. very very very fast, pickin it up monday or tuesday prob, ill have pics of it :) woohoo

Posted By: TeknoGroover
Date: 02/02/2006
Thanks for the comment. If you were talking about the lower lip on the front bumper with the 4 long holes, that's part of the bumper, not a lip. Also the front bumper lights are the hazards blinking on, which gives a better photo effect. The car came tinted when I got it, which the person received it from the factory tinted. The only thing I don't like of your car is the hood and trunk. Wannabe Carbon Fiber looks gross. It looks like you were in an accident and too lazy to get them painted. My opinion though. Anyway, loks fairly clean

Posted By: clyde004
Date: 02/02/2006
man.....i've thought about it and thought about it......the rims are sweet lookin man!!!. i love it. you know i'm goin sleeper with mine, so i haven't gotten aftermarket rims....but i have two sets of stock rims like these...so ithink i may blast a black set!!!!! those look really sweet man. check my profile in a few weeks for my updates. pics of the new engine mods, NOS, guage panels, interior, and probably a set of blacked out wheels, thanks to you! the tint on my windows is the ancient stock tint...my guess is it's around 35%. i'll be getting new tint in about a month.going 20% on the front two and 13% around the back. keep up the work man!!!!

Posted By: liz evans
Date: 02/02/2006
Yeah for sure, send it to my email



xliz880x@netscape.net

Posted By: liz evans
Date: 02/02/2006
ill make them lighter with photoshop

and take newer pics

cause i have new rims now





but thanks though

Posted By: liz evans
Date: 02/01/2006
my parents bought me the car and it was silver
and then i got it painted pink

Posted By: Snowflake
Date: 02/01/2006
I hit a deer doing 70....flipped her into a ditch...I'm fine but she's gone for good.. I made $1000 off parts on her the roof was crushed and both doors were crushed but everything else was fine. The deer landed on her I had to be cut out of the car

Posted By: nspec
Date: 01/21/2006
Heyman. Thanks for the comment. The grill in the first picture was a photo edit, but I will make one out of my oem grill. Nice car by the way.


Posted By: cb7tuner91
Date: 01/20/2006
The 98 up coupe rear seats will fit in the 90-93 coupes but idk about any other models idk if im going to do that anymore though just because it is too hard to find the seats i want. Im think bout gettin the stock seats recover with black cloth with red stitching using the integra headrest.

Posted By: jdm itr civic
Date: 01/20/2006
hey man, thanx for the post on my accident pics. that sucked the big one, but i was thinking. i am going to paint it after i get the new panel, but should i go with the milano red, a more vibrant red, or possibly white?? gimme your opinion.

Thanx
-jake

Posted By: PolishmyAccord
Date: 01/17/2006
Hey man, i took out the gril when i was cleaning the engine, i liked the look, im gonna get a nicer grill in there, i dont want to showoff my "H" Honda symbol, i wanna blow past people and them be like...what the hell is that you know what im sayin lol (actually the orignal looked like crap, so im getting a new one)

Posted By: s2kguy07
Date: 01/16/2006
hey man i took those pictures but i accidentally deleted ur email so email me back so i can send them to you, haha

Posted By: PolishmyAccord
Date: 01/14/2006
Hey bud thnx for posting about my car...i was wondering, i was looking at Ians site, and you said that you go directions to change the rear side (the little ones) from the amber colour to a white or something like that, i cant seem to find these instructions, gimme a shout if you can...the email is tomseter69@hotmail.com...thx

Posted By: inferno
Date: 01/14/2006
yeah paint the grill black cause it doesnt match, it would look better black



and i wouldnt do the whole front end black cause your going to hate it after your done and wish you never thought of that in the first place



window tint should only be like $100 with lifetime warrenty your car will look a lot better with it

Posted By: inferno
Date: 01/12/2006
yeah i like the rims now, they look a lot beter than your olds ones, but what happened to the front lip??? paint that ***** flat black along with the grill and put it back on

are you going to get window tint??

the girl that bought my car she is painting it right now

it should be out sometime next week

Posted By: jdm itr civic
Date: 01/12/2006
Rims look good man, like to see a project in motion. Keep it up.


Posted By: BrutalB83
Date: 01/11/2006
Hey man I just noticed you painted your rims black! Looks good man! Especially with your car riding low like that! Those are the 94-95 EX alloys right? Keep up the good work man! Later!

Posted By: Accord CB7
Date: 01/10/2006
Look hella better with new rim with paint job rim. Keep it up dude.

Posted By: parki59
Date: 01/10/2006
ya thats the accord that crashed into a ditch....it was written off and he got a grand cherokee

Posted By: Marcus_Hogan81
Date: 01/01/2006
Nice lip kit. I was feelin' the SuperMan hood! Black rims would look great on your car's color. A polished lip around each rim would also help set it off. You should check out my ride now since I got my new wheels on now. I paint the car once I get back from Iraq this summer. Peace


Posted By: riello2u
Date: 12/22/2005
thanks yeah i changed my mind lol .. good starting point

Posted By: step2me
Date: 12/22/2005
nice ride keep it up

Posted By: Kazuki
Date: 12/13/2005
the b18a1 is a 91-93 Integra ls motor. It has 140 HP stock, and is non-vtec.. while the b18c1 is a 97-98 Integra GSR motor.. it has about 170 horsepower, and is vtec... plus there's different compression ratios, and a higher redline

Posted By: jezekracing
Date: 12/02/2005
ay0! you type a lot LOLOLOL. You a funny d00d....good luck with your accord...throw an H in there asap! Cake walk swap bro!

Posted By: jezekracing
Date: 11/30/2005
You PAINTED your hood black??

Posted By: jdm itr civic
Date: 11/30/2005
Hey man, i wish i could but he had a 00 civic and he boosted it and eventually blew it, i can prolly get some pics of his rims if you want while i'm at it i will grab a few of his motor after it was blown. ouch!

Posted By: jdm itr civic
Date: 11/29/2005
Hey man wats up, I have the 16x7 rota slips, i almost got the 17's but i had a friend with them and he had some troublelsl with rubbing while autocrossing. The 16's work great and i think the black would work great for you. peace

Posted By: jdm itr civic
Date: 11/29/2005
nice accord man, doin awsome, thanks for checkin out my ride, ill try and get up a better pic from like the back and down the side, i put two more up from the front angle for now. Thanks

Posted By: cb7rider
Date: 11/27/2005
heres a smaple of bronze

http://i27.photobucket.com/albums/c169/blkcb7/accord9.jpg

Posted By: Kazuki
Date: 11/20/2005
if i dony sell it by the time i have enough money for a motor, im going to get a complete B16A1 swap.. go from 130-140 HP to 168(and Vtec, yay).. so i can take advantage of the situation

Posted By: Santu_SaEcHao
Date: 11/20/2005
what's up man?! I want to know you get new upgrade anything? lol

Posted By: cb7rider
Date: 11/09/2005
haha thx fo a comment dude..i updated wid some current pic..

Posted By: RAMMY
Date: 11/07/2005
wassupp bro..man i wish i didnt put that body kit on....ill trade you..lool...after winter ill start doin big miods 2 it...i was thikin of sellling it but ***** that...the engine is still mint...the interior neeeds fixin up though...from the dooor panels to the seats....ex-gurlfriend rippped em up...

Posted By: Kazuki
Date: 11/02/2005
ill keep you updated if you do the same. im getting a carbon fiber hood within the next few weeks.. that before the paint job, because if it looks sick, i might leave it red. anthony goes to his gf's house to access internet, becuz he doesn't hav internet at his right now, so i think he's been just chekin out his site once in a while. I haven't even talked to him much, so i'm not sure either

Posted By: Kazuki
Date: 11/01/2005
LOL, you noticed that guys CRX looks like the ae86 color scheme im going for... DAM it makes me drool... but 2 things, im gettin those rims in gunmetal, and my hood will actually be carbon fiber

Posted By: CRX_GURLS
Date: 10/31/2005
yea I'v come to establish that fact but I'm out to do it and I'm gonna go at it... I found a 94 Mazda Protege white 4dr that I'm gonna work on

Posted By: 92AccordLX
Date: 10/31/2005
my hood and front bumper arent painted yet, its just stock black. ima paint it soon when i get the chance to

Posted By: CRX_GURLS
Date: 10/30/2005
she was almost finished and I wanted another car to rebuild...I'm wanting something no one's tried yet...maybe a Geo or a Kia

Posted By: 92AccordLX
Date: 10/29/2005
hey whats up man, i got some new pix of my accord with new rims n a drop..check em out sometime. latez

Posted By: Got2GruV
Date: 10/26/2005
thanks bro! gud luck on ur future mods!!! just make it simple and clean. keep it up!!! peace out!!!

Posted By: CD5acrd
Date: 10/24/2005
yeah it is F@$!ed up. My car was stolen in PG co. MD. It was recovered 3days later. my insurance company desided to junk it. No I didn't have an alarm. I will get one for my next ride. No I don't have AIM or MSN messenger. Oh removing the fenders is pretty easy on CD model Accord. Open the hood. Remove the corner light, mud flaps, wheel, plastic splash liner, remove the plastic clips from the rocker panel( you can slide the rocker panel forward and completely remove it or just pull it down outta the way so you can get to the bolt). Open the door remove the top bolt remove the bolts holding the fender on under the hood. remove the bolt holding the bumper to the fender. Pull the bumper down on the side. Use and extension to get to the bolt holding the fender bracket to the body. carefully pull the fender off. Be careful not to scratch or dent anything. Installation is the reverse of removal. You just gotta be extra careful putting the fender back on because it is very deformed or damaged.

Posted By: lakers6902
Date: 10/23/2005
fast and the furious is so fake. cmon think about it... how come there putting nissan engines in honda cars? thats like impossible, pay attention to the movie and you will see that most the time they are talking about engines for other cars and putting them in hondas

Posted By: cthan3o3
Date: 10/23/2005
theres just too many people into this sorta thing, so i dunno what im gonna end up doing. in a way it is also the money thing. i had an almost completed turbo kit but then i bought this ls/vtec motor but eventually got ripped off for a tranny online so right now im trying to get rid of the motor. plus i have no money to finish the turbo kit i started..

Posted By: steve from cali
Date: 10/22/2005
nice lip, just needs some low profile tires n phat rims to set it off

faxpro

Posted By: s2kguy07
Date: 10/18/2005
hey whats up, yea it was in the shop gettin lowered and a hurricane came through and flooded a creek and also flooded my car..4 feet of water over it..it fried my computer and totalled the car..what a bad day..but ill email u a pic of it after it was totalled..tahts all i have. Whats ur EMAIL?

Posted By: TeamPrototype
Date: 10/18/2005
hold moly.watta superman ride.first time im seeing this.do it yourself job.overall but nice

Posted By: AccordEX94
Date: 10/18/2005
Yo whats up my emails racerx94@hotmail.com <--- MSN messenger too..

Posted By: s2kguy07
Date: 10/17/2005
hey, pics are updated

Posted By: s2kguy07
Date: 10/17/2005
hey whats up, on my 94 accord im pretty sure i did have to loosen my headlights up to get the bumper off but on my 97 there wasnt any bolts under them?? im glad tho, haha..and my front windshield isnt tinted, ive seen it done but screw that, i wanna be able to c when i drive at night, hah..ill have my pics updated tomm with the lip..latah

Posted By: s2kguy07
Date: 10/16/2005
hey man whats up, yea i finally got it on, i had to drill all new holes bec only like 3 lined up right..but dammmmnnn its low, i kno im gonna mess it up..i was gonna get it paitned but instead i just did it myself, i used the promoter,automotive spray paint, and clear and it came out really nice..but thanks for the info, and yea i kno what ur sayin about the headlights, on my old accord it took me 6 hours to get them off when i put the angle eyes on it. i had to take both fenders off and the bumper..i wanna put the black jdm headlights on this one but i really dont feel like doin that all over again..but if u wanna get ur windows tinted, i did a 20% black tint on the back driver and pass. window and also in the back windshield, then i did hte 35% tint on the front windows...did u ever get my message about the stock alloy wheels, i really need some before winter starts..hit me back, latah

Posted By: s2kguy07
Date: 10/15/2005
hey man, did u have any trouble gettin that lip to fit on ur car, i got the mugen lip and it wont fit..but its for my car??

Posted By: AccordEX94
Date: 10/14/2005
Yo man thanks for the comment :) I just installed my Type R Front Lip a couple days ago :) Only reason why I did it is because I got in an accident this past saturday and hit a guardrail.... I had all the bolts out of my bumper so when i hit it it came clean off lol... I already had a primered bumper at my house ready to be put on... It would of been nice if it was only the front that came off... I *****ed my rear quarter panel and my headlights and rear tails....Now I need new tails heads, and a bumper... but whatevs more time to make my car nice and pretty :D

Posted By: Ian77
Date: 10/12/2005
Hi joe. thanks for the info on the moldings. I didn't know that about accords. You learn stuff new everyday! Also, you're right, I have no sunroof. Anyway, thanks for getting back to me. Keep in touch. Later.

Posted By: 19 5th gen 96
Date: 10/11/2005
on your side skirts....did you sand them? or are they painted....what did you use?? how did you do it?

Posted By: Kazuki
Date: 10/09/2005
yea exactly. nice special effects on that last pic, looks sweet

Posted By: Ian77
Date: 10/08/2005
Hey ya joe. Did you paint your moldings to match the car color? It looks sweet. I was thinking of doing that. Also, the bar for the top rear is called the rear upper strut tower bar. I am getting a dc sports one in a week or two. I will then have all three bars to stiffen up the chasis. Take care bro. 96 accords rule!

Posted By: Kazuki
Date: 10/08/2005
yep, this is the new car for me( its pretty d@m fast ).. i really like it, im goin to paint it white, and give it a similar look to the AE86, but its not going to be a wanna Trueno.... my lord, people on this site need to take chill pills..

Posted By: CRX King
Date: 10/04/2005
hey man, thanks for the complement, i am sellimg the car cause i have another one on this forum if you missed it :P its the yellow one, but anyways, i like your ride, keep it real. cya

Posted By: 92AccordLX
Date: 10/03/2005
when i originally got my silver 17s they werent my choice, i got them as a gift, so i jus put em on the car, i didnt plan anything but they just sat out like 1/2 inch out of the body, which didnt allow me to drop it, cuz if i had droped it, and there was a pot hole or sumtin, it would have hit the fender and caused damage, but i got rid of those and im prolly gonna get 16s next time cuz i wanna drop it a lot more, or maybe ill do 17s, still debating on it..latez

Posted By: goldenchild722
Date: 10/03/2005
kul. I'll b sure 2 keep u updated, and thx alot 4 the support. holla

Posted By: fdtboricua2007
Date: 10/02/2005
hey thanks for the comments. i have the carbon fiber tailights becuase it goes with the paint job and matches alot better than red & white ones. besides everyone as them on thier cars. cant wait to see your car done.

Posted By: goldenchild722
Date: 10/01/2005
thx alot 4 the compliment. I was thinkin bout paintin my accord all silver with a blue or violet (or both) pearl coat, and chrome flakes, but right now, I'm jus a lil indecisive. That would b my 1st paint color selection, but I got so many other ideas, ya know. keep it lookin good. holla

Posted By: goldenchild722
Date: 09/30/2005
wow. the picture had me fooled. well, thx alot 4 checkin out my accord. sorry 4 the lil confusion (lol). well, keep up the good work and keep it lookin good. holla

Posted By: Justin M
Date: 09/30/2005
Hey man, thanks for the comment! I wish my honda was newer like yours, but with my budget now i wont have money to upgrade to a newer one for awhile. Anyways, thanks again for the comment!

Posted By: Mz562
Date: 09/30/2005
hey joe it's me v im probley going to do my tint this weekend, and i really want those lights i showed u for the front so soon i should have a new look. take care. V

Posted By: Accord CB7
Date: 09/30/2005
Nice job to do the hood as turn into black but take your time to make it perfect. Hope you get better wheel so you not need to complain about the gay look stock wheel lol.

Posted By: BlueBeast
Date: 09/29/2005
hey thanks man yea the skunk 2 coilovers work well but i need to up grade my shocks they are just monroe sensatrac with no dampering so its a harsh ride but the drop is great it's like being glued to the road

Posted By: goldenchild722
Date: 09/29/2005
thx 4 checkin out da wip. I really like ur honda. Its very, very clean-cut, very good lookin, nothin 2 extravagant. Where did u get the factory prelude wheels from?? I been lookin everywhere but can't find em anywhere. Keep up the good work

Posted By: Ian77
Date: 09/27/2005
hi Joe. I went to Stereo King in Portland and a friend and I used a heat gun. We went over the entire lens evenly and SLOWLY took it apart. We took out the amber and then closed the lens back up with the silicone sealent that I got at NAPA auto parts. It was a bit of time but with two people and a lot of patience you can take the entire lens apart. Later man.

Posted By: Snowflake
Date: 09/27/2005
thats allen...the kid in the maroon family car...well we broke up...I'm with...allen now...he drives that beat up primer yellow civic

Posted By: silentfloor
Date: 09/23/2005
heeh, your accord looks almost exactly like mine, color and everything! come take a look when i get pictures up (hopefully soon).

Posted By: s2kguy07
Date: 09/23/2005
hey man, u have a set of those 94 and 95 ex wheels u wanna sell...i cant put my konigs in the snow and sand, haha

Posted By: Andrew 11111111
Date: 09/21/2005
Pretty cool except for the F22, but my engine is nothing to brag about!

Posted By: texas_hatch
Date: 09/20/2005
yo whats up

i got a new car

i sold the white accord







but anyways

the interior looks pretty good












Posted By: 92AccordLX
Date: 09/19/2005
wsup, i added a stock lip to my car, and i ordered some coil overs for my car on ebay, hopefully those work out and ill get pics of it soon, how many inches u think i shud drop it on stock rims?

Posted By: Mz562
Date: 09/17/2005
hey u sorry took so long for me to get back ok i need help loading my pics and i dont know how to do aim. haha sorry anyways u can send me an email then i can respond back so i can upload some better pics if u dont mind plz.

Posted By: DJ Hizzle
Date: 09/16/2005
lookin good man.... its comin along nicely. lemme know when you post some pics of what ev comes next. PEACE

Posted By: RICEFED
Date: 09/15/2005
glad i could help. when i put the engine back together i'll take better pictures of my interior so you can see how i did mine. and if you got a bud who does auto painting, see if he will help out by using actual auto paint on your interior w/ clear over it. that way it want easily scratch off when you touch it. plus it looks REALLY good after you wax it :P peace

Posted By: 92AccordLX
Date: 09/15/2005
nice, ur ride is comin along just fine, lip gives it a nice import tuner look to it, im thinkin of putting a stock one, still debating on that, i got my engine pic up n ill keep u up to date on any mods i do..keep me updated on urs too...later

Posted By: Ian77
Date: 09/14/2005
The taillights were not that bad. I didn't do any cutting. I heated the whole light around the edges until the silicone melted. I pulled it apart and took out the amber. I bought some new silicone sealent at a hardware store and sealed it all back up. All in all it was about 45 minutes to an hour. Still a long and delicate process. Later

Posted By: RICEFED
Date: 09/11/2005
ok.....here we go that duplicrap you got CAN be good if used properly. just like painting a car preperation is everything. and duplicolor on carpet straight sucks.....just use it on plastic surfaces. prep the surface by cleaning it with rubbing alchohol or something close to that. spray one light coat over it what i call "dusting it". make sure it's sprayed evenly. let it dry 5-10 min. repeat this 3-4 times till your satisfied. make sure that it's low humidity in the air, weather can make or brake a paint project. now on to the cloth materials..... carpet order new carpet....seat covers....you better not. something i want you to take to heart when it comes to altering your ride...if your going to do something, do it right. even if it takes you a bit longer to do it. if you "half-ass" something you will ALWAYS go back fix it later wich means you spent MORE money...as far as your seats go i would have them professionally upholsterd (i think i spelled that right) even if it's one seat at a time. rear seats first then front. should run around 600 to 800ish. pending on what materials you pick. hope this helps.....keep up the good work....and thanks for the comments too.

Posted By: Mz562
Date: 09/07/2005
Hey Joe yes the picture that i have up are my stock tires and rims, but i bought new rims and tires 17's but my pictures wont upload.lol i will have better pictures soon, just been a little busy.

Posted By: BlenDeR
Date: 09/06/2005
Looks good now you just need some rims. Try this website for those seat covers your looking for. http://www.katzkin.com

Posted By: mrjoker1us2
Date: 09/04/2005
yep my ride is the same ass color as yours lol, its ok when its all shined and washed but i dont like it much neither, i might go SI blue or White real soon, thanks on the comment on the doors i like them, i get more ohhhs and thats tight now then ever lol

Posted By: Mz562
Date: 09/03/2005
Hey Joe hows it going? well yup me and u got the same ride. there are some things im considering doing to my car but have no ideal where to start so i will be hitting u up soon on some questions if thats cool?

Posted By: s2kguy07
Date: 09/02/2005
ha if its that much of a pain im not even gonna worry about doin it, thanks for the info tho..latah man

Posted By: Ian77
Date: 09/02/2005
Hi Joe. I finally got the amber lenses out of the taillights. Check it out if you have a chance. Thanks again for the help and instructions. Later.

Posted By: Crucianman73
Date: 09/01/2005
I tinted my rear window break lamp to have it match. I'm sure you can find a clear lense somewhere for the rear window break lamp.

Posted By: mrjoker1us2
Date: 08/31/2005
i got one pic of the doors now im not done so dont mind the sides being gone lol

Posted By: Broadwaychic19
Date: 08/27/2005
Hey Joe(Ahh Cord) This is Jackie Chucks girlfriend that did his pictures for his 2000 Civic EX as well as taking those numerous photos i also helped him install the cold air intake, and i put on the spoiler as well! But luckily for you we added something new a picture of me haha ..give us any ideas were definetly open to it!

Posted By: BrutalB83
Date: 08/25/2005
Hey man, how's it going? Yeah, I actually don't have any pics of my car all smashed up. It went into the body shop pretty quickly after the accident, so I didn't get a chance to take any pictures. I went with stock parts because that's what insurance would pay for, and because the Accord is my only car, so I needed to get it fixed and get it back as soon as possible, so I didn't really want to take the time to order aftermarket parts and wait for them to show up. Actually I'm thinking of selling the Accord and just getting something else, since somebody was nice enough to key it all up for me. I'm thinking maybe an S-10? What do you think? I live in Michigan now and the roads are really crappy here, so I think I might hold off on trying to have a modified car for a while, until I finish college and get out of here.

I see that you got your suspension on now man, it looks good! And I like that front lip too! I have some springs and an exhaust for my car, but I'm gonna hold off on putting those on until I decide if I am gonna sell it or not...but anyway, keep up the good work man! Later!

Posted By: Crucianman73
Date: 08/25/2005
I see your ride coming along good. I have some more pics to take. I will take the tommorow 08/25/2005 and put them on the site. Check it out when you get a chance. latah

Posted By: inferno
Date: 08/21/2005
actually its with tires i just got them and they cost me a lil over 200 and i got them balanced and put on so if i sold them it would be with the new tires

thier kumo's 195-55-15
still have them just sitting in my garage

Posted By: johnhinson
Date: 08/19/2005
def EX rims bro... they look nice

Posted By: mrjoker1us2
Date: 08/16/2005
i was gonna shave the back handles and lambo also lambo them but going back wards towards the back wheel.you should save up a lil money and come ova here and get your interior done up the right way you'll be real happy with interior and not paint

Posted By: lakeraider77
Date: 08/16/2005
hey man this is all about brothership on here, ur cars probably gonna be the ***** when u get ur stuff on there

takes time and money man, took me 3 years and yes it is an auto.... I only race like once every 2 weeks, but I always win shes not slow at all... Holla at me when uve got some more stuff to talk about homes

Posted By: CD5acrd
Date: 08/15/2005
Dzaccord is selling his rims you might wanna contact him. If had to choose between the OEM alloys it would be a toss up between the 94-95 EX wheels and the 92-96 Prelude Si wheels.

Posted By: CD5acrd
Date: 08/15/2005
As far as rim choices go I don't like any of the stock Honda rims. I say forget all of the Honda OEM alloys and go with 17" or 18" aftermarket alloys.

Posted By: inferno
Date: 08/15/2005
sux you dont live in texas

id sell you the flat black EX rims
for 250

Posted By: mrjoker1us2
Date: 08/13/2005
oh ***** guess what u got today (August 13) some Lambo doorssss pics real soon

Posted By: mrjoker1us2
Date: 08/12/2005
ok i added some close up pics of the seats

Posted By: mrjoker1us2
Date: 08/12/2005
the front seats back seats and door panels are all material no paint bro all that CF red i will take a close up for you it looks bad ass when its cleaned up and shiny

Posted By: mrjoker1us2
Date: 08/11/2005
***** i would never take this dash out again its H3ll, you wheel has to be dropped on the floor there is bults under it that will drop it,then take the Gauges out from the 2 screws,then take the screw behind all the cruise control,demmer,then all the screws in the dash and the vents have to come out,the center where your radio is has to come out and the arm console,the gear shift console,the glove box has a couple screws, when you take the airbag out disconnect the battery so it dont deploy on you,then all the bis Azzz wires have to be taken off the clips carefully,the dash is one big piece its not a 2 piece like i was thinking it was. if youi drop the stearing wheel its alot easyier to take the dash out,and putting it back is the fun part remembering where all the stuff goes lol.the only thing on my interior that is paint is the (vents,the gauge cover,and the door handle covers) all the dash is a red carbon fiber with white Viynl and the seats,door panels,and the back deck lid in window.

Posted By: sleeper
Date: 08/09/2005
sorry forgot to respond to your question....the 96 does not run but is in otherwise excellent condition...it is black leather interior but i am putting the interior in my own car

Posted By: sleeper
Date: 08/09/2005
hey man thanks for checking out my ride...like i said, just got it, so its a work in progress...i like your ride...the front lip looks good...so does the clearing of the tails...did you do it yourself? or did you buy them...i did the same on my 94 on my own...keep it up

Posted By: robs4drautosir
Date: 08/07/2005
oh yeah its a painted, I had my primered for about 3 months. I wish I would not have painted it so early because I Had alot of other things that I wanted to put on it

Posted By: robs4drautosir
Date: 08/07/2005
I like how you went with the lip kit, its clean as hell

Posted By: inferno
Date: 08/04/2005
well he is planning on buying a h22 for her and converting it to standard

he has a shop

and ill be working thier sometimes too

so i get free brake jobs/oil change and whatever else

and the hatch isnt ls





im buying the ls/vtec engine

from someone else

and then putting it in the hatch

Posted By: inferno
Date: 08/03/2005
actually im sad to say im selling my car

and im not going to mount the rims
cause im keeping them for a trade for another set of stock si rims
because my best friends gf wants to buy my car
and im selling it for 3500
so with that money
i can buy the hatch and buy my friends
ls/vtec and still have extra money
so spend on other stuff

Posted By: CD5acrd
Date: 08/02/2005
thanx for the advice. Both of my front fenders where off in Feb 05. The splash liner came out of my left fender in Oct 04 damaging the fender and sidemarker. My right fender was damaged in Dec 04 when someone hit my car while it was parked. The damage at the rear of my car happened in Nov 04 someone hit my car while it was parked. What luck huh? I ordered a set of JDM fenders and had them painted the at the same time the rear end was repaired in Jan 05 I put them on myself instead of letting the bodyshop do it in Feb 05 and saved myself some $$$$.

Posted By: mrclickyheels
Date: 07/29/2005
Hey man cords comin along nice since i last looked (been a while) keep it up.

Posted By: accordshr1
Date: 07/27/2005
Yeah there is plenty of room for ac are u crazy i live in Arizona of course and remembr its and accord pleanty of space lol!

Posted By: inferno
Date: 07/26/2005
actually thier is a guy selling those rims for 150

but the tires are bad



its on a local forum

im a member of



if you go to www.discounttiredirect.com



you can get some falken tires for like

42.00 a piece and it comes out to like 200

thier bad@ss tires cause my friend has em on his si

and all he does is street race and that thing hugs

corners like no other



just let me know and ill see if the guy still has em

Posted By: inferno
Date: 07/26/2005
i got some new pics





i took the grill off too

now all you have to do is get

some stock ex rims



and i have to get a black hood



:p

Posted By: phixion
Date: 07/25/2005
I can't understand your comments well (grammer, spelling), =\ but I'll see what I can answer...

Strut bar just ties the shock mounts or subframe points together to tighten up the chassis. This doesn't do very much for handling though as it doesn't decrease sway/yaw much if any, and it doesn't allow you to corner faster, BIG misconception there. Swaybars actually bind the suspension (at the lower control arms) and the frame as one almost, since the bar connects to both things. By tying the suspension to the frame of the car (subframe in some cases like with the Civic) it allows the suspension to not move as much or yaw (lean/sway) as much when cornering, this greatly improving the handling. The bigger swaybar you have (larger diameter) the better the results of course. But with most Hondas, too much of a good thing is BAD. I used to run an Integra Type-R 22mm rear swaybar on my Civic, and eventually it started to rip itself right out of the subframe which is bad on a catastrophic level, major safety hazard basically. Lickily it didn't rip too much, and I was able to get the rip and tear welled back closed and had some "1/8 thick steel plates welded over that area for added strength and protection. Now I currently run a Del Sol VTEC 15mm rear swaybar, and it's not too much different. Car still handles great, and I don't have to worry about it damaging my car any. The 5th and 6th gen Civic chassis can only withstand up to a 17mm rear swaybar before requiring reinforcement with it, and even then anything bigger will eventually damage the subframe.

Well good luck with things.

Posted By: cthan3o3
Date: 07/25/2005
well i have a cai, header, exhaust, 62mm throttle body, intake manifold, msd ignition, external coil, spoon chip, short shifter, aem pulleys, ngk wires, removed powersteering, and removed a/c, but its still slow. i've beaten an integra ls and civic si, but i still think its slow. thanks for the advice tho :o)

Posted By: lboog100
Date: 07/24/2005
hey man nice accord lookin good hey little by little man jus keep workin at it an ride gonna look good


Posted By: cctgc
Date: 07/24/2005
i love all the clear outs bro...and the front lip...i've considered about putting a front lip on my ride too...it's sweet

Posted By: blavon694
Date: 07/22/2005
thanks for the commons~ your front lip looks even better. although we have the same type, the structure is different. you must have some screws/bolts at the bottom, just like phixion's. it makes ur car even lower. I wish i could have that kind. later~

Posted By: phixion
Date: 07/22/2005
Nope, no H-braces for Accords that I know of, only Civics, Integras and S2000's to my knowledge. You could always have a metal/machine shop fabricate one for you, though that would be way expensive. ANyways with my setup, even fast turns at 50+mph my tires don't make any noise, it actually takes a lot for them to break loose and make noise, even at the track aty 80+ they don't make noise, when they do that means you're losing traction which is a BAD thing. It sounds cool, but it hurts handling performance. Also swaybars do 100X's more for handling than strut bars do, strut bars are pretty useless actually. Anyways, keep up the good work and be careful on the streets, that's why I take myself to the track or auto-X events. ;)

Posted By: lovemycivic
Date: 07/17/2005
Thanks for the comment!!! No I'm not German at all but my hubby is in the military so we are stationed over here, I can't wait to come home to the states!! anyways You got a nice accord! It's really clean!! Well talk to you later!

Posted By: inferno
Date: 07/14/2005
i mean it has a drop

but if i drop it anymore

im going to tuck all the tires







i do want smaller rims though

Posted By: inferno
Date: 07/12/2005
alright i got the pics of the lip on my page







now all i needs is to drop it more :/

Posted By: inferno
Date: 07/10/2005
monday im buying a h4 headlight upgrade

all thanks to mah man

----MuffinCivicMan2---



next week ill be buying a oem hood for

90 bucks brand new, they come primper black



so are cars will be looking kinda similar

except mine will be white



i think you should take off the plate on the front bumper















i was thinking about primering the whole car grey

but that wont happen for awhile

Posted By: inferno
Date: 07/10/2005
i took my plate off the front bumper







it looks so much better ill post pics

soon and ill let you know when thier up

Posted By: inferno
Date: 07/07/2005
i got the lip

it was only 89 bucks















and its white ahah so i dont really have to paint it

but the kit is deff up for sale

selling it all for 80 bucks

Posted By: inferno
Date: 07/06/2005
the front bump was only 100

i pretty much got my whole kit for

230 but it was all bought at different times





i think im going with the lip

Posted By: inferno
Date: 07/04/2005
yeah thanks for answering my question, but also the 94 lip and the 96 lip are different ill have to post up a pic of how my car looks now cause its all back to stock except the side skirts cause i still need to get a passenger side one since it fell off on the freeway



but yeah i just wanted to know if it hung lower but my stock lip and that type r front might hang as low as each other

i was thinking about getting the mugen lip and paint all that black shizz under neath the license plate white, but i think it looks good on your bumper just dont know if i should invest on getting one or just paint it

Posted By: inferno
Date: 07/01/2005
is thier much of a difference with the stock lip and the type r cause i want one but i dont know if i should just paint the one i have or get a new one? and where did you get yours??

Posted By: Ian77
Date: 06/18/2005
hi joe. Check out my new ride pics. I finally got a digital camera and I was able to put some decent pics on my profile. I will get to the taillights one of these days. Later man.

Posted By: GeTinLine
Date: 06/07/2005
drop your car and you should feel a big difference. i got upper front and upper rear and lower rear strut bars.. and it like a bear giving bear hugs on the road ahha. well yeah you get the idea, i can cut 65 on a cloverleaf...but im too scared to go any faster.

Posted By: Kazuki
Date: 06/01/2005
Yea, anthony's car will be faster for awhile, but im workin on it, just tryin to finish up my exterior mods

Posted By: GuentK01
Date: 05/24/2005
My pics are updated, that was the longest couple of hours of your life huh?!

Posted By: garret
Date: 05/23/2005
finally lowered it i see looks real good keep me updated on any new projects of yours

Posted By: hondaspeed77
Date: 05/23/2005
hey dude it wasnt hard at all just took a while thats exactly what i did i took it all out to paint and do my interior it used to be gray and green hey if your from around me ill just come help you do it it aint ***** to do

Posted By: Kazuki
Date: 05/13/2005
hey very cool you saw that video...well guess what, my goal is to spank that red hatch ass..so just wait, ill do whatever it takes(get some NOS :)...turbo, i duno, ill wait and see......but good luck on ur car, make some vids too if you want

Posted By: GuentK01
Date: 05/12/2005
Thanks for looking at my car, I now have airride installed (no pics yet) and I have started on interior. I am doing the interior myself. So far I have the door panels done. My car is all show, no go! LOL!! I will post pics later tonight. Be sure to check them out.

Posted By: 4U2NV
Date: 05/10/2005
Peep my accord again. I took your advice and added some pix of side and rear.

Posted By: Nonehere
Date: 05/09/2005
naww i dident paint it, i took the door panels apart and stripped the old cloth oout and replaced the old one with red cloth. i dont know about interior paint. me i do custom work, well i dont think you cant paint on fabric. you can paint the interior but dont have to worrie about the cloth until later. if your going to replace your cloths go to a fabric store, pic out a fabric you want to uses, makes sure its durable. get some spray glue to adhere the fabric on that doorpanel. about the racing vids, i have to send it to you from aim or yahoo. if you have cable or dsl or broadband for that matter will send the file fast.

Posted By: inferno
Date: 05/08/2005
***** yeah i know what you mean about the wind

because that kept happening to me when i was painting my bumper. i like the hood thats what i wanted to do with mine cause right now its just to damn white i need something else so i was going to paint it up black to give it a different feel, good job though brah

Posted By: inferno
Date: 05/06/2005
is your hood spray paint with gloss or is that actual paint with clear

Posted By: s2kguy07
Date: 05/04/2005
hey man i got my wheels put on. the pics are updated

Posted By: BrutalB83
Date: 05/02/2005
Yeah man somehow my old profile got erased, so I just took some new pics and made a new one. Hey, good to see you got some updates, your ride is looking nice man, keep it up!

Posted By: MrFrijolero
Date: 05/01/2005
Thanx for comments... I think I will do what you suggested on the shucks and coilovers. Good luck wiith all those future mods, there going to perform and look great, in my opinion though, dont put on a wing.

Posted By: Ian77
Date: 04/30/2005
joe. I am still working on the taillights. ;) I live in McMinnville OR which is about an hour from Portland. Nice and quiet, a lot of space to rev up and run. :). I need to get a better suspension. My springs are old and squeek when I hit anything that is on the road. I also would like to lower it a bit more and get rid of some tire gap. Maybe get lower profile tires too. Hope you are doing well on your accord. The hood looks good! later man.

Posted By: GuentK01
Date: 04/29/2005
I have updated pis, take a look.

Posted By: Ian77
Date: 04/28/2005
Hi joe. I just ordered Tein Basic coilovers. I should get them in about a week or two. I will let you know when I get them on. I hope you get your set up on soon as well. later dawg.

Posted By: s2kguy07
Date: 04/27/2005
hey man when are u puttin those coils on ur car and the exhaust?!! i wanna c how it looks slammed

Posted By: inferno
Date: 04/27/2005
that lip is pretty nice, i want to get one for my back bumper

Posted By: RedBadAzzGyrl
Date: 04/23/2005
HEY, JOE!! AWESOME PICS OF UR CAR, U got great taste, man... I'll bet u re proud of yo car... HELL YEA SURE we'll take pics 2gether, holler me when u swing ur lower down yo car.... I think my car is lonely for sum quite time need 2 get hang out w/ yo n Long's car ;-D (get the pix?) JK... Anywayz I'll holler ya lata...

Posted By: Ian77
Date: 04/23/2005
What do you think about the Skunk2 coilovers? I was thinking about getting some. Thanks man.

Posted By: albooogie
Date: 04/23/2005
nice whip man cool ride..

Posted By: garret
Date: 04/20/2005
hood looks good and it would look awsome with black wheels. im going to order the grill soon but im saving up for a cam now, i ordered a skunk 2 cam gear to put on with it. you should put your lowering kit on some time this week. i did it in less than a day and i suck on working on cars but i had my dad to help.

Posted By: dpopdxa
Date: 04/20/2005
yeah, paint process takes a while but fun, both the accord and the other cars that your friends have a pretty slick, your friend san has a f**K nice as hatch

Posted By: s2kguy07
Date: 04/19/2005
hah u wanna buy my white wheels??u kno u want them

Posted By: s2kguy07
Date: 04/18/2005
naw, its the "unknown" i just got a email from the bastards i ordered them from and they are out of stock so they wont get a shipment of the wheels till thursday so i prolly wont have them for like 2 weeks. but oh well they are gonna look sweet when they get put on.

Posted By: CRX_GURLS
Date: 04/18/2005
like it thanks for the comment Dane has an Accord he's trying to fix

Posted By: BrutalB83
Date: 04/18/2005
To answer your question up there, the one for the top rear is called the rear strut tower bar, it's exactly the same as the front one, it just goes on the rear strut towers instead. Looking good by the way, later...

Posted By: s2kguy07
Date: 04/17/2005
what do u think about the new wheels i just ordered, a pic of them are on my page, they are piiiiiimp

Posted By: Junior13x23
Date: 04/16/2005
clean car, check mine out

Posted By: s2kguy07
Date: 04/15/2005
dude....my damn wheel wont be here for alteast 2 months!!! they said they gotta ship the *****ing thing from over seas..i think im just gonna go buy konig hurry's (black with chrome lip)

Posted By: Accordian52
Date: 04/14/2005
hit me up on AIM sometime, and i'll be glad to answer all of your questions.. -> Hondaguy1106 is my handle

Posted By: s2kguy07
Date: 04/12/2005
man my wheel still isnt even in stock yet, its on back order so who knows when ill get it .. its pissin me off soo bad my car looks gay with 3 white wheels and a damn black one haha but oh well. yea i dunno if i wanna sell it, i want somethin with a turbo but im not done with this car yet so whooo knows haha ttyl man peace

Posted By: TeamRPMaccord
Date: 04/12/2005
good luck modding your ride man.

Posted By: s2kguy07
Date: 04/11/2005
damnit mannn!!! i just found out my damn front swey bar is bent too how gay is that

Posted By: CRX_GURLS
Date: 04/09/2005
I really like the lip knit on the new accors! It's real nice!

Posted By: garret
Date: 04/06/2005
yeah the header has the OBX label on one of the top pipes. i purchased the header for $194 at streetstyler.com which at the OBX website it say it cost like $349 so it was a ggod deal.

Posted By: 4U2NV
Date: 04/05/2005
Come peep the ride again. Paint and interior is pretty muc done.

Posted By: garret
Date: 04/04/2005
the front felt a little stiffer and better on corners but now the back of the car wants to flex more so im going to get a rear strut bar soon. Yeah the header changed that color once it heated up and its starting to get a blueish color like you said yours did, it made my car a lot louder and deeper sounding, it sounds so mean when the VTEC kicks in but now i have quiet down around cops.

i got the put on a type-r lip on now so check it out some time.

Posted By: Accordian52
Date: 04/04/2005
Your new accord looks very nice! i really like the lip kit! you do need to get the suspension installed though! accord's look amazing lowered, just a little bit!

to answer your question- with otherwise stock supension, you won't notice much of anything with it. as a test, take it off, and take some corners ratehr quickly. but it in again, and repeat. with a more aggressive ride height, and stiffer springs//shocks is when you should notice it.. think of this as the front suspension of your car...
(.........) notice the lack of rigidity higher up. under cornering, the top will flex in. with the strut tower bar..
(:::::::) you will have something on the top to greatly reduce, and hopefully eliminate and flex at all.

Posted By: Nonehere
Date: 04/03/2005
yeah this is my second profile, i closed the other one down because i sold my car. i dident want to leave a profil of that car sice i sold it. the wing i bought it from ebay it cost about $225 with shipping. the spoiler is called Techno-R wing. you tell me what is better have the profile up even though i sold it or no?

Posted By: Ian77
Date: 04/03/2005
Hi ya Joe. On the rear side markers. Do you have to have a red bulb with the clear lenses? just checking. Later man.

Posted By: Santu_SaEcHao
Date: 04/02/2005
I want to know when u get coilover kit put ur a car. need more get part of motor.. lol.

Posted By: Silverbolt
Date: 03/30/2005
The top is actually stock. I was planning on having the whole upper half custom made in carbon fiber so it seems as if the carbon fiber hood kind of flows into the car through the windshield... but that project was too expensive, especially since I was starting to lose intrest in fixing up my car. The seats were re-upholstered. Mine are clean and nice... but there are cars now'a days that are insane! Check out this guy's interior! We didnt have this stuff around back in my day!



http://www.hondashowoff.com/profile.php?id=3605

Posted By: CTr_Nemesis
Date: 03/30/2005
sick lip dude looks clean. i got my rims and tires through a friend so that's why they were cheap


Posted By: Ian77
Date: 03/30/2005
Hi joe. I really said that I needed just the plugs. I have msd wires and they work pretty well. I have bosch plugs and I wanted to get NGK or Denso. I will probably get NGK thanks to you. Later man. Good looken out!

Posted By: Ian77
Date: 03/28/2005
Yo Joe! Thanks man for the info. I will take it into consideration. One more side note, those back clear bumber lights are sweet. Where's a good place to look for those. Later.

Posted By: 4dr
Date: 03/27/2005
not sure where you read that this is gonna be sold, this car is definetly gonna stay awhile. That type R lip is what your car needs.. now you just need to lower that thing all the way.

Posted By: s2kguy07
Date: 03/27/2005
dudeee my car is f'ed up so bad, i was goin down the road and hit a big ass pot hole and blew out my front tire and shock and bent and cracked my wheel...how gay is that, and now my car is so low i cant drive it with the spare tire!- so be careful when u put those coils on ur car

Posted By: Ian77
Date: 03/26/2005
Hey joe. I need to get new spark plugs and I want your expert oppinion. Denso, NGK, Bosch, whats out there that is good. Thanks man! (still working on the lights)

Posted By: Marcus_Hogan81
Date: 03/24/2005
Yep I'm looking at ebay right now!!!!

Posted By: Marcus_Hogan81
Date: 03/24/2005
Nice lip. Looks like your work is commin' along

Posted By: garret
Date: 03/23/2005
is that the Type-R front lip on your car. It look real good i think i'l look into getting that front lip instead. keep up the work its lookin good.

Posted By: FattMatt
Date: 03/21/2005
Floor mats are diamond plate.. think u can get em @ jcwhitney.com now and the spoiler is from wings west

Posted By: pacman22
Date: 03/17/2005
Simple yet nice, keep it up bro, you'll get there soon enough, I still got a loooong ways to go on mine. Keep in touch.





Frank

Posted By: Accord CB7
Date: 03/15/2005
Nice ride. Gonna need to see your car drop down with Shunk2 and install the full header, catback to make wonderful deep feels on the road.... Nice little R type on ur front bumper. Keep it up.

Posted By: Civic_Love05
Date: 03/08/2005
hey man .. the ceramic headers are great .. stainless steel headers will start turning different colors after a while do to heat and whatever... but yea the intake headers and exhaust i have noticed some change but havent been able to take it to the dyno or anything so i'm not sure how much of a change there is .. there isnt a dyno anywhere around where i live lol

Posted By: CTr_Nemesis
Date: 03/08/2005
with rims and tires they cost me 500 brand new...

Posted By: AllShowNoGo :o)
Date: 03/07/2005
No i dont like fastlane ,i hate them, there shipping is to slow and i heard that if they like your car and want somthing off of it they get your address when they do your work and come jack your stuff later.That happened to a friend of mine.Anyways heres the phone for AXIOM # 253-722-1012 its on 3825 steilacoom blvd unit c & d lakewood 98499 .Ask for Kyle hes the owner. Its right by Clover Park college,and the cementary.

Posted By: garret
Date: 02/25/2005
i have day pics of the lens so you can see them better

Posted By: garret
Date: 02/25/2005
the bumper lights i have are a black housing with clear lense and that is the factory front lip that came on it

Posted By: s2kguy07
Date: 02/24/2005
hey bro when u gettin all that put on?

Posted By: AllShowNoGo :o)
Date: 02/21/2005
Check out my new rims ,im waiting for the JDM thin side mouldings.I got a set on back order.I hate waiting for things.

Posted By: Marcus_Hogan81
Date: 02/20/2005
BLACK WIDOW KIT HUH? GOOD CHOICE CAN'T WAIT TO SEE IT.

Posted By: Silverbolt
Date: 02/18/2005
I didnt paint my upper dash, thats stock. I have considered having it re-wrapped in white, but the glare would be too much for me to drive around with. To take out the dash, I heard that its not hard... but its tricky the first time around. Its also very tedious because of all the screws and other parts you have to remove.

Posted By: Marcus_Hogan81
Date: 02/16/2005
I'll be back from deployment in March. I'll have those pics of my late honda accord for you then. I didn't get any damaged pics ( I was too heart broken). More bad news my front bumper is on its last leg so I'll be looking for a new one soon. Any suggestions?

Posted By: s2kguy07
Date: 02/14/2005
yea i just saw what u wrote me about gettin shocks and i think i am..it rides good now but its really stiff and whenever i hit a big bump the rear end is loud as hell but it doesnt bother me too much, i cant get over how good it handles now its crazy

Posted By: s2kguy07
Date: 02/13/2005
just updated my pics

Posted By: Invazn08
Date: 02/12/2005
The F23 Series are from 98 and up Accords....All 98 up single cam motors are vtec F23..they have 160hp and I think from 150 to 160Lbs of torque.Im pretty sure with an aftermarket clutch and basic bolt ons for this motor in a hatch...it could be able to take on alot of cars...i would say this motor would be comparable to a B18C GSR..we'll just have to see what it runs after the swapp...im guessing maybe low mid 14's...

Posted By: GeTinLine
Date: 02/12/2005
yes it is a lip..mugen lip to be exact.

Posted By: Marcus_Hogan81
Date: 02/12/2005
Thanks for checking out my car. We've fell on hard times in Alaska. I was victim of a hit and run in my own yard!
I got the door fixed though. I have a few pics of my old accord I just got to scan them. I'm thinking of the buddy club 2 series or the spider series for my accord. Yours I recommend you don't use anything that throws off the original smooth shape of your car like the vader body kit. I like that color though

Posted By: Team_Invazn
Date: 02/11/2005
yea we prolly do that in da summer...cuz rite now we gona repaint our cars...but yea thnx fo the comments...cant wait to see ur future mods...let me know when u get it done..peace out bro

Posted By: s2kguy07
Date: 02/11/2005
it also rides stiff but not bad i actually like how it rides and it handles like a whole different car. if ur puttin coil overs on it it will handle good but you will have a very bumpy ride. i was gonna order the skunk coil overs but they told me not to bec it would ride horrible but who knows

Posted By: s2kguy07
Date: 02/11/2005
haha na man i had to cut the flash off on the camera, i guess thats y it blurred..hopefully ill take new pics today.. latah

Posted By: 4U2NV
Date: 02/11/2005
Once you take off the molding, you need to tack weld a strip of sheet metal to cover the area, and then the least amount of bondo/glass as possible. Be sure to let each tack cool before you do another. Doors can very easily be warped from the heat. Let it air cool. Dont spray with water. You have to be patient. Hope I helped.

Posted By: s2kguy07
Date: 02/11/2005
hey bro, i just got it lowered the pics are on here..they suck bec it was dark outside and it was in my garage, ill take more tomm in the light

Posted By: s2kguy07
Date: 02/11/2005
hey, i just got it lowered, the pics suck right now but tomm when its light outside ill take new ones

Posted By: GeTinLine
Date: 02/10/2005
If your really good with autobody work..then this should be no problem... i used fiberglass on the inside door...about 2 sheets of fiberglass..hmm my measurements i say would be about 2in x 2 in....i used fiberglass on the inside for support and on the outside i used body filler..its time consuming because u have to take the door panels off and get ur hands in there....but if ur a good welder then i suggest u weld them shut..or u can use jb weld...or whatever that is they sell at the hardware store...but if u decide to weld it up..becareful because the metal might warp on you.. need any more help let me know!

Posted By: garret
Date: 02/10/2005
it will be stiff or bumpy when you lower a lot like mine because you dont have as much travel in the suspension, my ride is stiff but handels corners extremely great since i lowerd it so you wont have trouble handeling but since you have coilovers you will probably have a better ride if you dont lower it as much that all i realy now since im 17 and just starting learning about this stuff sorry if not much help

Posted By: garret
Date: 02/10/2005
its 5in off the ground and i make up my drive extremely slow i cant even put my finger inbetween my car and ground and that for real. my muffler never hits the only thing that hits is the tow hook on the bottom of the car.

Posted By: Ian77
Date: 02/09/2005
Hey joe. I haven't started yet on the taillights. Too busy. I will let you know how it turns out. Thanks again. You da man!

Posted By: 19 5th gen 96
Date: 02/08/2005
NICE RIDE. similar to mine. check it out!!

Posted By: s2kguy07
Date: 02/07/2005
yea thats cool, i just got my skunk springs in today im gettin them put on tomm, its gonna be slammed :)

Posted By: Marcus_Hogan81
Date: 02/06/2005
I feel your pain. 94 Dark blue LX 5speed. Takin' out ahead of its time by white 99 F150. I have a gold Accord now. Check mine out. Its under MARCUS HOGAN

Posted By: s2kguy07
Date: 02/03/2005
ohh ok so this is the new one, please take off that thing on the roof, lol

Posted By: AllShowNoGo :o)
Date: 02/03/2005
Whats up ? did you just want more pictures :o)

Posted By: jezekracing
Date: 02/03/2005
Be sure to keep us updated....you got a nice base to work with...Late.

Posted By: Ian77
Date: 02/03/2005
sweet car. Lower it and get some rims. Also I love the back with red and clear. I wish I knew how to do that. Check mine out. Late.